On 11/03/2015 10:55 PM, Prabhakar Kushwaha wrote: > Management complex Firmware, DPL and DPC are depolyed during u-boot boot > sequence. > > Add new DPAA2 commands to manage Management Complex (MC) i.e. start mc, aiop > and apply DPL from u-boot command prompt. > > Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com> > --- > Changes for v2: Sending as it is > Changes for v3: fix compilation for ls2085_emu target > Changes for v4: Sending as it is > > arch/arm/cpu/armv8/fsl-layerscape/README.lsch3 | 30 ++ > drivers/net/fsl-mc/mc.c | 382 > ++++++++++++------------- > include/configs/ls2085aqds.h | 12 - > include/configs/ls2085ardb.h | 12 - > include/fsl-mc/fsl_mc.h | 5 + > include/fsl-mc/fsl_mc_private.h | 2 +- > 6 files changed, 220 insertions(+), 223 deletions(-) > > diff --git a/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3 > b/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3 > index 03e18f6..d1f92c4 100644 > --- a/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3 > +++ b/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3 > @@ -242,3 +242,33 @@ MMU Translation Tables > | 0x81_0000_0000 | | 0x08_0080_0000 | > ------------------ ------------------ > ... ... > + > + > +DPAA2 commands to manage Management complex > +------------------------------------------- > +Management complex Firmware, DPL and DPC are depolyed during u-boot boot > +sequence. > + > +New DPAA2 commands has been added to manage Management Complex (MC) i.e. > +start mc, aiop and apply DPL from command prompt. > + > +a) fsl_mc start mc [FW_addr] [DPC_addr] - Start Management Complex > +b) fsl_mc apply DPL [DPL_addr] - Apply DPL file > +c) fsl_mc start aiop [FW_addr] - Start AIOP > + > +u-boot etherenet support sequence :- > +a) fsl_mc start mc [FW_addr] [DPC_addr] - Start Management Complex > +b) DPMACs device will be available now for use > + > +Linux boot sequence :- > +a) fsl_mc start mc [FW_addr] [DPC_addr] - Start Management Complex > +b) fsl_mc apply DPL [DPL_addr] - Apply DPL file > +c) No DPMACs availabe for use in u-boot > +c) boot Linux > + > +AIOP boot sequence :- > +a) fsl_mc start mc [FW_addr] [DPC_addr] - Start Management Complex > +b) fsl_mc start aiop [FW_addr] - Start AIOP > +c) fsl_mc apply DPL [DPL_addr] - Apply DPL file > +d) No DPMACs availabe for use in u-boot
Prabhakar, The help message is not accurate. The FW_addr and DPC_addr are not optional, are they? If a user must provide the address, please put the format as fsl_mc start mc <FW_addr> <DPC_addr> The [] means optional, <> means mandatory. I am using the old school convention, hopefully the rest of the world agrees with me. This change is relative big for using MC. I would appreciate some command examples with real address in README and in commit message. It is helpful for the transition. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
