Hi Ted,
On 25 November 2015 at 11:27, Ted Chen <tedc...@realtek.com> wrote:
> Add a condition of set_address and set_configuration to check
> if the request is standardized.
>
> Signed-off-by: Ted Chen <tedc...@realtek.com>
> ---
> drivers/usb/host/xhci.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index ca598aa..cb8a04b 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -941,10 +941,12 @@ static int _xhci_submit_control_msg(struct usb_device
> *udev, unsigned long pipe,
> if (usb_pipedevice(pipe) == ctrl->rootdev)
> return xhci_submit_root(udev, pipe, buffer, setup);
>
> - if (setup->request == USB_REQ_SET_ADDRESS)
> + if (setup->request == USB_REQ_SET_ADDRESS &&
> + (setup->requesttype & USB_TYPE_MASK) == USB_TYPE_STANDARD)
> return xhci_address_device(udev, root_portnr);
>
> - if (setup->request == USB_REQ_SET_CONFIGURATION) {
> + if (setup->request == USB_REQ_SET_CONFIGURATION &&
> + (setup->requesttype & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
> ret = xhci_set_configuration(udev);
> if (ret) {
> puts("Failed to configure xHCI endpoint\n");
> --
> 1.7.9.5
>
Tested on Odroid-XU4 with Ethernet USB3.0 RT8153-VB.
Tested-by: Anand Moon <linux.am...@gmail.com>
Reviewed-by: Anand Moon <linux.am...@gmail.com>
-Anand Moon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
