On Friday, November 20, 2015 at 03:49:46 PM, Jan Viktorin wrote: > Hello Marek and U-Boot community,
Hi, ahoj, > I am trying to build the U-Boot 2015.10 with SPL for the EBV SoCrates > board (Altera SoC FPGA, Cyclone V). It builds, however, I am unable to > boot. It does not print any output. I can boot the SoCrates board with > an older bootloader generated by the Altera tools. The SoCrates was always a bit of an orphan, but I'm submitting a patch to fix it now, since I have one. > I am able to build & run U-Boot for Altera SoC Development Kit (NOT > SoCKit), the SPL works however U-Boot freezes... > > U-Boot 2015.10 (Nov 20 2015 - 15:43:36 +0100) > > CPU: Altera SoCFPGA Platform > FPGA: Altera Cyclone V, SE/A6 or SX/C6 or ST/D6, version 0x0 > BOOT: SD/MMC Internal Transceiver (3.0V) > Watchdog enabled > I2C: ready > DRAM: 1 GiB > MMC: SOCFPGA DWMMC: 0 > *** Warning - bad CRC, using default environment > > In: serial > Out: serial > Err: serial > Model: Altera SOCFPGA Cyclone V SoC Development Kit > Autoboot in 3 seconds > [...frozen here...] > > So, what is the status of the SPL for SoCFPGA in upstream? Does anybody > test all the claimed socfpga platforms? I'm testing mostly MCVEVK and SoCkit and ArriaV SoCDK. Dinh, you wanna look at the CV SoCDK issue ? I might be able to set it up later this weekend, but don't hold your breath, I am pretty overloaded. Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
