For Setting and clearing the bits in SEC Block registers
sec_clrbits32() and sec_setbits32() are used which work as
per endianness of CAAM block.
So these must be used with SEC register address as argument.
If the value is read in a local variable, then the functions
will not behave correctly where endianness of CAAM and core is
different.
Signed-off-by: Aneesh Bansal <aneesh.ban...@freescale.com>
CC: Alex Porosanu <alexandru.poros...@freescale.com>
---
Changes in v2:
New Patch Set created with an additional patch.
drivers/crypto/fsl/jr.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c
index f63eacb..b553e3c 100644
--- a/drivers/crypto/fsl/jr.c
+++ b/drivers/crypto/fsl/jr.c
@@ -470,17 +470,13 @@ static void kick_trng(int ent_delay)
sec_out32(&rng->rtfreqmin, ent_delay >> 2);
/* disable maximum frequency count */
sec_out32(&rng->rtfreqmax, RTFRQMAX_DISABLE);
- /* read the control register */
- val = sec_in32(&rng->rtmctl);
/*
* select raw sampling in both entropy shifter
* and statistical checker
*/
- sec_setbits32(&val, RTMCTL_SAMP_MODE_RAW_ES_SC);
+ sec_setbits32(&rng->rtmctl, RTMCTL_SAMP_MODE_RAW_ES_SC);
/* put RNG4 into run mode */
- sec_clrbits32(&val, RTMCTL_PRGM);
- /* write back the control register */
- sec_out32(&rng->rtmctl, val);
+ sec_clrbits32(&rng->rtmctl, RTMCTL_PRGM);
}
static int rng_init(void)
--
1.8.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
