Hi York, This patch set in top of my previous patches. I did to make sure it can be applied cleanly.
armv8: lsch3: Fix lane protocol parsing logic driver: net: fsl-mc: Add create, destroy APIs in flibs driver: net: fsl-mc: Add APIs for DPMAC objects in FLIB armv8: ls2085aqds: Print function name during SerDes error driver: ldpaa: Add api to return linked PHY ID of DPMAC driver: net: fsl-mc: Increase MC command timeout driver: net: fsl-mc: Add DPAA2 commands to manage MC driver: net: fsl-mc: Create DPAA2 object at run-time driver: net: ldpaa: Use DPMAC as net device driver: net: ldpaa: Add debug information armv8: ls2085a: Add workaround of errata A009635 driver: net: ldpaa: Fix Rx buffer alignment Regards, Prabhakar > -----Original Message----- > From: York Sun [mailto:york...@freescale.com] > Sent: Wednesday, November 11, 2015 12:40 AM > To: Kushwaha Prabhakar-B32579 <prabha...@freescale.com>; u- > b...@lists.denx.de > Cc: Srivastava Pratiyush-B46174 <pratiyush.srivast...@freescale.com> > Subject: Re: [PATCH 1/2][v2] armv8: LS2080A: Rename LS2085A to reflect > LS2080A > > > > On 11/09/2015 03:12 AM, Prabhakar Kushwaha wrote: > > LS2080A is a prime personality of Freescale’s LS2085A. It is a > > non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe > endpoint etc. > > So renaming existing LS2085A code base to reflect LS2080A (Prime > > personality) > > > > Signed-off-by: Pratiyush Mohan Srivastava > > <pratiyush.srivast...@freescale.com> > > Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com> > > --- > > Changes for v2: Rebased on LS1043 patch set > > > > README | 3 + > > arch/arm/Kconfig | 44 +++++++---- > > arch/arm/cpu/armv8/fsl-layerscape/Makefile | 4 +- > > arch/arm/cpu/armv8/fsl-layerscape/README.lsch3 | 4 +- > > arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 2 +- > > arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 2 +- > > .../arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c | 11 +++ > > .../{ls2085a_serdes.c => ls2080a_serdes.c} | 0 > > arch/arm/cpu/armv8/fsl-layerscape/soc.c | 2 +- > > arch/arm/cpu/armv8/fsl-layerscape/spl.c | 4 +- > > arch/arm/dts/Makefile | 4 +- > > .../{fsl-ls2085a-qds.dts => fsl-ls2080a-qds.dts} | 8 +- > > .../{fsl-ls2085a-rdb.dts => fsl-ls2080a-rdb.dts} | 8 +- > > .../arm/dts/{fsl-ls2085a.dtsi => fsl-ls2080a.dtsi} | 4 +- > > arch/arm/include/asm/arch-fsl-layerscape/config.h | 4 +- > > arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 6 +- > > .../include/asm/arch-fsl-layerscape/fsl_serdes.h | 2 +- > > .../include/asm/arch-fsl-layerscape/immap_lsch3.h | 6 +- > > .../{ls2085a_stream_id.h => ls2080a_stream_id.h} | 4 +- > > arch/arm/include/asm/global_data.h | 2 +- > > board/freescale/{ls2085a => ls2080a}/Kconfig | 12 +-- > > board/freescale/ls2080a/MAINTAINERS | 8 ++ > > board/freescale/ls2080a/Makefile | 8 ++ > > board/freescale/{ls2085a => ls2080a}/README | 2 +- > > board/freescale/{ls2085a => ls2080a}/ddr.c | 3 +- > > board/freescale/{ls2085a => ls2080a}/ddr.h | 0 > > .../{ls2085a/ls2085a.c => ls2080a/ls2080a.c} | 2 + > > board/freescale/{ls2085ardb => ls2080aqds}/Kconfig | 6 +- > > board/freescale/ls2080aqds/MAINTAINERS | 8 ++ > > .../freescale/{ls2085aqds => ls2080aqds}/Makefile | 2 +- > > board/freescale/{ls2085aqds => ls2080aqds}/README | 16 ++-- > > board/freescale/{ls2085ardb => ls2080aqds}/ddr.c | 5 +- > > board/freescale/{ls2085aqds => ls2080aqds}/ddr.h | 0 > > board/freescale/{ls2085aqds => ls2080aqds}/eth.c | 92 +++++++++++----- > ------ > > .../ls2085aqds.c => ls2080aqds/ls2080aqds.c} | 4 +- > > .../ls2080aqds_qixis.h} | 0 > > board/freescale/{ls2085aqds => ls2080ardb}/Kconfig | 6 +- > > board/freescale/ls2080ardb/MAINTAINERS | 8 ++ > > .../freescale/{ls2085ardb => ls2080ardb}/Makefile | 2 +- > > board/freescale/{ls2085ardb => ls2080ardb}/README | 12 +-- > > board/freescale/{ls2085aqds => ls2080ardb}/ddr.c | 5 +- > > board/freescale/{ls2085ardb => ls2080ardb}/ddr.h | 0 > > .../eth_ls2085rdb.c => ls2080ardb/eth_ls2080rdb.c} | 2 +- > > .../ls2085ardb.c => ls2080ardb/ls2080ardb.c} | 4 +- > > .../ls2080ardb_qixis.h} | 0 > > board/freescale/ls2085a/MAINTAINERS | 8 -- > > board/freescale/ls2085a/Makefile | 8 -- > > board/freescale/ls2085aqds/MAINTAINERS | 8 -- > > board/freescale/ls2085ardb/MAINTAINERS | 8 -- > > ...ls2085a_emu_defconfig => ls2080a_emu_defconfig} | 2 +- > > ...2085a_simu_defconfig => ls2080a_simu_defconfig} | 2 +- > > .../{ls2085ardb_defconfig => ls2080aqds_defconfig} | 4 +- > > ...ds_nand_defconfig => ls2080aqds_nand_defconfig} | 2 +- > > .../{ls2085aqds_defconfig => ls2080ardb_defconfig} | 4 +- > > ...db_nand_defconfig => ls2080ardb_nand_defconfig} | 2 +- > > doc/README.fsl-trustzone-components | 4 +- > > drivers/ddr/fsl/fsl_ddr_gen4.c | 4 +- > > drivers/net/fsl-mc/mc.c | 5 +- > > Prabhakar, > > Are you sure you are using the correct code base? I don't even see function > do_fsl_mc(). > > York > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
