On Tue, 2009-08-04 at 14:27 +0200, Wolfgang Denk wrote: > Dear oa...@yahoo.com, > > In message <1249383697-28141-2-git-send-email-oa...@yahoo.com> you wrote: > > From: Alex Dubov <oa...@yahoo.com> > > > > STx AMC8548 board is an old, AMC form factor, MPC8548 based board intended > > for RapidIO applications. It features 16MiB NAND flash, one DDR2 soDIMM > > slot, ethernet on front panel and backplane, RapidIO on backplane, USB > > controller on local bus (not currently enabled) and no PCI of any kind. > > > > Signed-off-by: Alex Dubov <oa...@yahoo.com> > > --- > > Makefile | 3 + > > board/stx/stxamc8548/Makefile | 51 ++++++ > > board/stx/stxamc8548/config.mk | 32 ++++ > > board/stx/stxamc8548/stxamc8548.c | 168 +++++++++++++++++++ > > board/stx/stxamc8548/u-boot.lds | 143 ++++++++++++++++ > > include/configs/stxamc8548.h | 332 > > +++++++++++++++++++++++++++++++++++++ > > 6 files changed, 729 insertions(+), 0 deletions(-) > > create mode 100644 board/stx/stxamc8548/Makefile > > create mode 100644 board/stx/stxamc8548/config.mk > > create mode 100644 board/stx/stxamc8548/stxamc8548.c > > create mode 100644 board/stx/stxamc8548/u-boot.lds > > create mode 100644 include/configs/stxamc8548.h > > What's the difference between this patch and the previously submitted > one: > > Subject: [U-Boot] [PATCH 2/2] stx: add support for AMC8548 board > From: Alex Dubov <oa...@yahoo.com> > Date: Tue, 4 Aug 2009 02:26:49 -0700 (PDT) > > ?
It looks like the MAINTAINERS and MAKEALL entries are still missing for this board too FWIW. Hopefully the other feedback has been taken into consideration in this patch? It'd be nice when you resubmitted patches to include "v2" in the title, eg "[PATCH v2]" and also listed what you've changed in the comments below your signed-off-by. It makes it easier for others to keep track of what the most recent patch is and what has changed between resubmissions. Best, Peter _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot