Use spl alternate boot device feature to define fallback to
the main boot device as it is defined by hardware.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Igor Grinberg <grinb...@compulab.co.il>
Cc: Stefano Babic <sba...@denx.de>
Cc: Tom Rini <tr...@konsulko.com>
Reviewed-by: Tom Rini <tr...@konsulko.com>
Reviewed-by: Stefano Babic <sba...@denx.de>
---
Changes in V4:
- No changes.
Changes in V3:
- No changes.
Changes in V2:
- No changes.
board/compulab/cm_fx6/spl.c | 19 ++++++++++---------
include/configs/cm_fx6.h | 1 -
2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/board/compulab/cm_fx6/spl.c b/board/compulab/cm_fx6/spl.c
index d94ced9..d8328fd 100644
--- a/board/compulab/cm_fx6/spl.c
+++ b/board/compulab/cm_fx6/spl.c
@@ -337,16 +337,17 @@ void board_init_f(ulong dummy)
board_init_r(NULL, 0);
}
-void spl_board_init(void)
+void board_boot_order(u32 *spl_boot_list)
{
- u32 boot_device = spl_boot_device();
-
- if (boot_device == BOOT_DEVICE_SPI)
- puts("Booting from SPI flash\n");
- else if (boot_device == BOOT_DEVICE_MMC1)
- puts("Booting from MMC\n");
- else
- puts("Unknown boot device\n");
+ spl_boot_list[0] = spl_boot_device();
+ switch (spl_boot_list[0]) {
+ case BOOT_DEVICE_SPI:
+ spl_boot_list[1] = BOOT_DEVICE_MMC1;
+ break;
+ case BOOT_DEVICE_MMC1:
+ spl_boot_list[1] = BOOT_DEVICE_SPI;
+ break;
+ }
}
#ifdef CONFIG_SPL_MMC_SUPPORT
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index 0513204..180ea28 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -230,7 +230,6 @@
/* SPL */
#include "imx6_spl.h"
-#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80 /* offset 64 kb */
#define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS / 2 * 1024)
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
