On 23.10.15 11:18, Josh Wu wrote: > As sama5 board has 32k sram size, so the at91bootstrap and spl for sama5 > boards is bigger than 16k (0x4000). That will overlap the U-Boot > environment. So I move environment to 0x6000. And reduce its size as > well. > > Signed-off-by: Josh Wu <josh...@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.de...@googlemail.com> > --- > > include/configs/at91-sama5_common.h | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/include/configs/at91-sama5_common.h > b/include/configs/at91-sama5_common.h > index a5990ce..0b60f0b 100644 > --- a/include/configs/at91-sama5_common.h > +++ b/include/configs/at91-sama5_common.h > @@ -98,8 +98,8 @@ > #elif CONFIG_SYS_USE_SERIALFLASH > /* u-boot env in serial flash, by default is bus 0 and cs 0 */ > #define CONFIG_ENV_IS_IN_SPI_FLASH > -#define CONFIG_ENV_OFFSET 0x4000 > -#define CONFIG_ENV_SIZE 0x4000 > +#define CONFIG_ENV_OFFSET 0x6000 > +#define CONFIG_ENV_SIZE 0x2000 > #define CONFIG_ENV_SECT_SIZE 0x1000 > #define CONFIG_BOOTCOMMAND "sf probe 0; " > \ > "sf read 0x21000000 0x60000 0xc000; " > \ > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
