As sama5 board has 32k sram size, so the at91bootstrap and spl for sama5
boards is bigger than 16k (0x4000). That will overlap the U-Boot
environment. So I move environment to 0x6000. And reduce its size as
well.

Signed-off-by: Josh Wu <josh...@atmel.com>
---

 include/configs/at91-sama5_common.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/configs/at91-sama5_common.h 
b/include/configs/at91-sama5_common.h
index a5990ce..0b60f0b 100644
--- a/include/configs/at91-sama5_common.h
+++ b/include/configs/at91-sama5_common.h
@@ -98,8 +98,8 @@
 #elif CONFIG_SYS_USE_SERIALFLASH
 /* u-boot env in serial flash, by default is bus 0 and cs 0 */
 #define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_OFFSET              0x4000
-#define CONFIG_ENV_SIZE                        0x4000
+#define CONFIG_ENV_OFFSET              0x6000
+#define CONFIG_ENV_SIZE                        0x2000
 #define CONFIG_ENV_SECT_SIZE           0x1000
 #define CONFIG_BOOTCOMMAND             "sf probe 0; "                          
\
                                        "sf read 0x21000000 0x60000 0xc000; "   
\
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to