Hi Simon,
On 22/10/15 22:08, Simon Glass wrote:
On 20 October 2015 at 20:37, Lin Huang <h...@rock-chips.com> wrote:
This add some basic files required to allow the board to dispaly
serial message and can run command(mmc info etc)
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v1:
- clean copyright announcement
arch/arm/dts/Makefile | 3 ++-
arch/arm/dts/rk3036-sdk.dts | 46 ++++++++++++++++++++++++++++++++
board/evb_rk3036/evb_rk3036/Kconfig | 15 +++++++++++
board/evb_rk3036/evb_rk3036/MAINTAINERS | 0
board/evb_rk3036/evb_rk3036/Makefile | 7 +++++
board/evb_rk3036/evb_rk3036/evb_rk3036.c | 7 +++++
configs/evb-rk3036_defconfig | 41 ++++++++++++++++++++++++++++
include/configs/evb_rk3036.h | 12 +++++++++
8 files changed, 130 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/rk3036-sdk.dts
create mode 100644 board/evb_rk3036/evb_rk3036/Kconfig
create mode 100644 board/evb_rk3036/evb_rk3036/MAINTAINERS
create mode 100644 board/evb_rk3036/evb_rk3036/Makefile
create mode 100644 board/evb_rk3036/evb_rk3036/evb_rk3036.c
create mode 100644 configs/evb-rk3036_defconfig
create mode 100644 include/configs/evb_rk3036.h
Can you also please update doc/README.rockchip with build instructions
and how to get an image onto this board?
I try to figure out how to merge binary blob and u-boot-dtb.bin use
mkimage,
i will update doc/README ASAP when i finish it. And where should
the binary blob store?
Regards,
Simon
--
Lin Huang
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
