Hi, Przemyslaw.
On 09/30/2015 08:14 PM, Przemyslaw Marczak wrote:
> This device uses SDHCI driver, for eMMC and SD cards.
> Trying bind the DW MMC driver with fdt node without all
> required properties, causes printing an error.
>
> This commit disables the DW MMC node.
Why does it need?
Trats board doesn't support the Designware IP, so i think right that it
shouldn't build.
If needs to modify, exynos-common.h should be modified.
>
> Tested-on: Trats
>
> Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com>
> Cc: Łukasz Majewski <l.majew...@samsung.com>
> Cc: Minkyu Kang <mk7.k...@samsung.com>
> --
> Changes V3:
> - new commit
> ---
> arch/arm/dts/exynos4210-trats.dts | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/dts/exynos4210-trats.dts
> b/arch/arm/dts/exynos4210-trats.dts
> index 36d02df..f3fac80 100644
> --- a/arch/arm/dts/exynos4210-trats.dts
> +++ b/arch/arm/dts/exynos4210-trats.dts
> @@ -117,4 +117,8 @@
> sdhci@12540000 {
> status = "disabled";
> };
> +
> + dwmmc@12550000 {
> + status = "disabled";
> + };
It seems to support dwmmc controller. 12550000 addr is for sdhci controller.
Best Regards,
Jaehoon Chung
> };
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
