On Thursday 23 July 2009 04:57:19 pm E Robertson wrote: > Hi all, > I've been trying unsuccessfully to see my jffs2 partition I've created by > the mtdtools under linux. If their a known issue with this? Is their a size > limit? Maybe the way it's created? I do not have a problem with this > partition from linux but also never looked at it from the u-boot. > I can change partitions but "ls" shows partition is empty when their are > files. > > ... > #define CONFIG_CMD_JFFS2 1 /** JFFS2 Support */ > #define CONFIG_CMD_MTDPARTS 1 > #define CONFIG_JFFS2_CMDLINE 1 > #undef CONFIG_CMD_FLASH > #define CONFIG_JFFS2_NAND 1 > #define CONFIG_JFFS2_DEV "nand0" > #define CONFIG_JFFS2_PART_OFFSET 0x0 > #define CONFIG_JFFS2_PART_SIZE 0x5000000 > #define MTDPARTS_DEFAULT "mtdparts=nand:80M(IMGS),-(DATA)" > #define MTDIDS_DEFAULT "nand0=nand" > ... > > Thanks, > E!
Forget to add I'm using 03.09 git source on SAM9263 SoC. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
