common/dlmalloc.c is quite big, both in .text and .data usage. E.g. for a
Mele_M9 sun6i board build this reduces .text from 0x4214 to 0x3b94 bytes,
and .data from 0x54c to 0x144 bytes.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
arch/arm/Kconfig | 1 +
include/configs/sunxi-common.h | 3 ---
2 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a862a7a..f53c41f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -518,6 +518,7 @@ config ARCH_SUNXI
select DM_USB
select OF_CONTROL
select OF_SEPARATE
+ select SPL_MALLOC_SIMPLE
select SPL_STACK_R
select USB
select USB_STORAGE
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 6aa1bf2..9ca642a 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -76,7 +76,6 @@
/* Note this is primarily set through Kconfig, we redefine it here so that
* we get warnings if the Kconfig value mismatches. */
#define CONFIG_SPL_STACK_R_ADDR 0x2fe00000
-#define CONFIG_SYS_SPL_MALLOC_START 0x2ff00000
#define CONFIG_SPL_BSS_START_ADDR 0x2ff80000
#else
#define SDRAM_OFFSET(x) 0x4##x
@@ -87,12 +86,10 @@
/* Note this is primarily set through Kconfig, we redefine it here so that
* we get warnings if the Kconfig value mismatches. */
#define CONFIG_SPL_STACK_R_ADDR 0x4fe00000
-#define CONFIG_SYS_SPL_MALLOC_START 0x4ff00000
#define CONFIG_SPL_BSS_START_ADDR 0x4ff80000
#endif
#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 /* 512 KiB */
#ifdef CONFIG_MACH_SUN9I
/*
--
2.4.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
