No need to configure indirect trigger address for every read/write.
Signed-off-by: Vikas Manocha <vikas.mano...@st.com>
---
Changes in v6: None
Changes in v5: fixed type cast compilation warnings.
Changes in v4: removed extra type casts.
Changes in v3: added commit message & removed extra bracket.
Changes in v2: Rebased to master
drivers/spi/cadence_qspi_apb.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c
index d053407..d377ad1 100644
--- a/drivers/spi/cadence_qspi_apb.c
+++ b/drivers/spi/cadence_qspi_apb.c
@@ -534,6 +534,8 @@ void cadence_qspi_apb_controller_init(struct
cadence_spi_platdata *plat)
/* Indirect mode configurations */
writel((plat->sram_size/2), plat->regbase + CQSPI_REG_SRAMPARTITION);
+ writel((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK,
+ plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
/* Disable all interrupts */
writel(0, plat->regbase + CQSPI_REG_IRQMASK);
@@ -693,10 +695,6 @@ int cadence_qspi_apb_indirect_read_setup(struct
cadence_spi_platdata *plat,
/* for normal read (only ramtron as of now) */
addr_bytes = cmdlen - 1;
- /* Setup the indirect trigger address */
- writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK),
- plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
-
/* Configure the opcode */
rd_reg = cmdbuf[0] << CQSPI_REG_RD_INSTR_OPCODE_LSB;
@@ -790,9 +788,6 @@ int cadence_qspi_apb_indirect_write_setup(struct
cadence_spi_platdata *plat,
cmdlen, (unsigned int)cmdbuf);
return -EINVAL;
}
- /* Setup the indirect trigger address */
- writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK),
- plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
/* Configure the opcode */
reg = cmdbuf[0] << CQSPI_REG_WR_INSTR_OPCODE_LSB;
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
