Fix the fdt read for spi-max-frequency as it's contained
in the child node. Current state of code is always
returning default value.
Signed-off-by: Chin Liang See <cl...@altera.com>
Cc: Dinh Nguyen <dingu...@opensource.altera.com>
Cc: Dinh Nguyen <dinh.li...@gmail.com>
Cc: Marek Vasut <ma...@denx.de>
Cc: Stefan Roese <s...@denx.de>
Cc: Vikas Manocha <vikas.mano...@st.com>
Cc: Jagannadh Teki <jt...@openedev.com>
Cc: Pavel Machek <pa...@denx.de>
---
drivers/spi/cadence_qspi.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
index 300934e..a00af87 100644
--- a/drivers/spi/cadence_qspi.c
+++ b/drivers/spi/cadence_qspi.c
@@ -291,10 +291,6 @@ static int cadence_spi_ofdata_to_platdata(struct udevice
*bus)
plat->regbase = (void *)data[0];
plat->ahbbase = (void *)data[2];
- /* Use 500KHz as a suitable default */
- plat->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
- 500000);
-
/* All other paramters are embedded in the child node */
subnode = fdt_first_subnode(blob, node);
if (subnode < 0) {
@@ -302,6 +298,10 @@ static int cadence_spi_ofdata_to_platdata(struct udevice
*bus)
return -ENODEV;
}
+ /* Use 500KHz as a suitable default */
+ plat->max_hz = fdtdec_get_int(blob, subnode, "spi-max-frequency",
+ 500000);
+
/* Read other parameters from DT */
plat->page_size = fdtdec_get_int(blob, subnode, "page-size", 256);
plat->block_size = fdtdec_get_int(blob, subnode, "block-size", 16);
--
1.7.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
