> -----Original Message----- > From: Ben Warren [mailto:biggerbadder...@gmail.com] > Sent: Tuesday, July 21, 2009 1:14 PM > To: Wolfgang Denk > Cc: Prafulla Wadaskar; Manas Saksena; Ronen Shitrit; Nicolas > Pitre; u-boot@lists.denx.de; Ashish Karkare; Prabhanjan > Sarnaik; Lennert Buijtenhek > Subject: Re: [U-Boot] [PATCH 5/6] net: Kirkwood_egiga: forced > interface speed config support > > Wolfgang Denk wrote: > > Dear Ben Warren, > > > > In message <4a656563.9020...@gmail.com> you wrote: > > > >> Prafulla Wadaskar wrote: > >> > >>> By default Auto Negotiation is enabled for interface speed but on > >>> some platforms like RD6281A it does not work. > >>> If you want to forced program it to desired speed, this > patch helps- > >>> > >>> Through this patch Auto negotiation can be disabled and desired > >>> interface speed can be configured > >>> > >>> This patch is tested on RD6281A Kirkwood board > >>> > >>> Signed-off-by: Prafulla Wadaskar <prafu...@marvell.com> > >>> --- > >>> > >> Applied to net repo. > >> > > > > Please reconsider - see my previous comment. [Sorry it came > so late.] > > > > Best regards, > > > > Wolfgang Denk > > > > > No problem. I assumed it was a chip erratum but should have > looked closer. Let's wait for Prafulla's response. Ideally auto negotiation must work, but :-( I don't think this is not for SoC/PHY erratum since both are working okay with other boards. Only the difference is on RD6281A the multichip mode is used, I am discovering why it is not working.
Meanwhile this patch does not harm anything, it enables RD6281A usecase We can undo it latter if I could positively discover the fix ;-D Regards.. Prafulla . . > > regards, > Ben > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
