Hi Michal, On Fri, Aug 21, 2015 at 1:49 AM, Michal Simek <michal.si...@xilinx.com> wrote: > Current behavior is that if CTRL+C is pressed command returns 0 that was > successful which is not correct behavior. > The easiest test case is "tftpboot 80000 uImage && echo yes" > and press CTRL+C. Then the second command is called which is incorrect. > > Error log: > zynq-uboot> tftpb 80000 uImage && echo yes > Gem.e000b000:7 is connected to Gem.e000b000. Reconnecting to > Gem.e000b000 > Gem.e000b000 Waiting for PHY auto negotiation to complete....... done > Using Gem.e000b000 device > TFTP from server 192.168.0.102; our IP address is 192.168.0.101 > Filename 'uImage'. > Load address: 0x80000 > Loading: ################ > Abort > yes > zynq-uboot> > > This patch adds -EINTR return value when CTRL+C is pressed. > > Signed-off-by: Michal Simek <michal.si...@xilinx.com> > Reviewed-by: Tom Rini <tr...@konsulko.com>
Acked-by: Joe Hershberger <joe.hershber...@ni.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot