So far if CONFIG_VGA_AS_SINGLE_DEVICE is not defined, the VGA device
will try to initialize a keyboard device (for x86, it is i8042). But
if i8042 controller initialization fails (eg: there is no keyboard
connected to the PS/2 port), drv_video_init() just simply returns.
This kills the opportunity of using a usb keyboard later with the vga
console, as the vga initialization part is actually ok, only keyboard
part fails. Change the code logic to allow this.

Signed-off-by: Bin Meng <bmeng...@gmail.com>
Reviewed-by: Simon Glass <s...@chromium.org>

---
In the long term, we should remove CONFIG_VGA_AS_SINGLE_DEVICE and
treat the cfb_concole an output device only. The keyboard part should
be moved out of cfb_console driver and be as a input device driver
separately.

Changes in v2: None

 drivers/video/cfb_console.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index 30e0317..aa7ca86 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -2247,16 +2247,17 @@ __weak int board_video_skip(void)
 
 int drv_video_init(void)
 {
-       int skip_dev_init;
        struct stdio_dev console_dev;
        bool have_keyboard;
+       bool __maybe_unused keyboard_ok = false;
 
        /* Check if video initialization should be skipped */
        if (board_video_skip())
                return 0;
 
        /* Init video chip - returns with framebuffer cleared */
-       skip_dev_init = (video_init() == -1);
+       if (video_init() == -1)
+               return 0;
 
        if (board_cfb_skip())
                return 0;
@@ -2272,11 +2273,9 @@ int drv_video_init(void)
        if (have_keyboard) {
                debug("KBD: Keyboard init ...\n");
 #if !defined(CONFIG_VGA_AS_SINGLE_DEVICE)
-               skip_dev_init |= (VIDEO_KBD_INIT_FCT == -1);
+               keyboard_ok = !(VIDEO_KBD_INIT_FCT == -1);
 #endif
        }
-       if (skip_dev_init)
-               return 0;
 
        /* Init vga device */
        memset(&console_dev, 0, sizeof(console_dev));
@@ -2287,7 +2286,7 @@ int drv_video_init(void)
        console_dev.puts = video_puts;  /* 'puts' function */
 
 #if !defined(CONFIG_VGA_AS_SINGLE_DEVICE)
-       if (have_keyboard) {
+       if (have_keyboard && keyboard_ok) {
                /* Also init console device */
                console_dev.flags |= DEV_FLAGS_INPUT;
                console_dev.tstc = VIDEO_TSTC_FCT;      /* 'tstc' function */
-- 
1.8.2.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to