The CONFIG_OF_CONTROL and CONFIG_SPL_OF_CONTROL is always enabled on Altera SoCFPGA, remove the unnecessary checks.
Signed-off-by: Marek Vasut <ma...@denx.de> --- include/configs/socfpga_common.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 07956f0..d170bb9 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -192,7 +192,6 @@ unsigned int cm_get_l4_sp_clk_hz(void); /* * QSPI support */ -#ifdef CONFIG_OF_CONTROL /* QSPI is controlled via DT */ #define CONFIG_CADENCE_QSPI /* Enable multiple SPI NOR flash manufacturers */ #define CONFIG_SPI_FLASH_STMICRO /* Micron/Numonyx flash */ @@ -212,12 +211,12 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #define CONFIG_CQSPI_DECODER 0 #define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_BAR -#endif -#if CONFIG_IS_ENABLED(OF_CONTROL) /* DW SPI is controlled via DT */ +/* + * Designware SPI support + */ #define CONFIG_DESIGNWARE_SPI #define CONFIG_CMD_SPI -#endif /* * Serial Driver -- 2.1.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
