From: Peter Tyser <pty...@xes-inc.com> Signed-off-by: Peter Tyser <pty...@xes-inc.com> --- include/configs/P2020DS.h | 1 - include/configs/XPEDITE5170.h | 1 - include/configs/aria.h | 1 - include/configs/mecp5123.h | 1 - 4 files changed, 0 insertions(+), 4 deletions(-)
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 676f013..70ab96f 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -412,7 +412,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy); #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h index 2553293..985b589 100644 --- a/include/configs/XPEDITE5170.h +++ b/include/configs/XPEDITE5170.h @@ -254,7 +254,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_I2C_OFFSET 0x3000 #define CONFIG_SYS_I2C2_OFFSET 0x3100 #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE /* PEX8518 slave I2C interface */ #define CONFIG_SYS_I2C_PEX8518_ADDR 0x70 diff --git a/include/configs/aria.h b/include/configs/aria.h index e7e238d..4211113 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -376,7 +376,6 @@ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */ #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index e00859a..1ecae00 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -249,7 +249,6 @@ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */ #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */ #define CONFIG_SYS_I2C_SLAVE 0x7F /* slave address */ -- 1.6.2-rc2.GIT _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
