This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)
Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---
arch/powerpc/cpu/mpc5xxx/Kconfig | 4 -
board/inka4x0/Kconfig | 9 -
board/inka4x0/MAINTAINERS | 6 -
board/inka4x0/Makefile | 8 -
board/inka4x0/inka4x0.c | 250 ---------------------
board/inka4x0/inkadiag.c | 464 ---------------------------------------
board/inka4x0/k4h511638c.h | 16 --
board/inka4x0/mt46v16m16-75.h | 16 --
board/inka4x0/mt46v32m16-75.h | 16 --
board/inka4x0/mt48lc16m16a2-75.h | 14 --
configs/inka4x0_defconfig | 4 -
include/configs/inka4x0.h | 413 ----------------------------------
12 files changed, 1220 deletions(-)
delete mode 100644 board/inka4x0/Kconfig
delete mode 100644 board/inka4x0/MAINTAINERS
delete mode 100644 board/inka4x0/Makefile
delete mode 100644 board/inka4x0/inka4x0.c
delete mode 100644 board/inka4x0/inkadiag.c
delete mode 100644 board/inka4x0/k4h511638c.h
delete mode 100644 board/inka4x0/mt46v16m16-75.h
delete mode 100644 board/inka4x0/mt46v32m16-75.h
delete mode 100644 board/inka4x0/mt48lc16m16a2-75.h
delete mode 100644 configs/inka4x0_defconfig
delete mode 100644 include/configs/inka4x0.h
diff --git a/arch/powerpc/cpu/mpc5xxx/Kconfig b/arch/powerpc/cpu/mpc5xxx/Kconfig
index 526e891..23117ac 100644
--- a/arch/powerpc/cpu/mpc5xxx/Kconfig
+++ b/arch/powerpc/cpu/mpc5xxx/Kconfig
@@ -18,9 +18,6 @@ config TARGET_A4M072
config TARGET_CM5200
bool "Support cm5200"
-config TARGET_INKA4X0
- bool "Support inka4x0"
-
config TARGET_IPEK01
bool "Support ipek01"
@@ -72,7 +69,6 @@ source "board/a3m071/Kconfig"
source "board/a4m072/Kconfig"
source "board/cm5200/Kconfig"
source "board/ifm/o2dnt2/Kconfig"
-source "board/inka4x0/Kconfig"
source "board/intercontrol/digsy_mtc/Kconfig"
source "board/ipek01/Kconfig"
source "board/jupiter/Kconfig"
diff --git a/board/inka4x0/Kconfig b/board/inka4x0/Kconfig
deleted file mode 100644
index 94a41f0..0000000
--- a/board/inka4x0/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_INKA4X0
-
-config SYS_BOARD
- default "inka4x0"
-
-config SYS_CONFIG_NAME
- default "inka4x0"
-
-endif
diff --git a/board/inka4x0/MAINTAINERS b/board/inka4x0/MAINTAINERS
deleted file mode 100644
index 246b2d4..0000000
--- a/board/inka4x0/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-INKA4X0 BOARD
-M: Detlev Zundel <d...@denx.de>
-S: Maintained
-F: board/inka4x0/
-F: include/configs/inka4x0.h
-F: configs/inka4x0_defconfig
diff --git a/board/inka4x0/Makefile b/board/inka4x0/Makefile
deleted file mode 100644
index c9a3540..0000000
--- a/board/inka4x0/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2009
-# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := inka4x0.o inkadiag.o
diff --git a/board/inka4x0/inka4x0.c b/board/inka4x0/inka4x0.c
deleted file mode 100644
index 0a32f0e..0000000
--- a/board/inka4x0/inka4x0.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * (C) Copyright 2008-2009
- * Andreas Pfefferle, DENX Software Engineering, a...@denx.de.
- *
- * (C) Copyright 2009
- * Detlev Zundel, DENX Software Engineering, d...@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jo...@motorola.com.
- *
- * (C) Copyright 2004
- * Martin Krause, TQ-Systems GmbH, martin.kra...@tqs.de
- *
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, w...@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm/io.h>
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-
-#if defined(CONFIG_DDR_MT46V16M16)
-#include "mt46v16m16-75.h"
-#elif defined(CONFIG_SDR_MT48LC16M16A2)
-#include "mt48lc16m16a2-75.h"
-#elif defined(CONFIG_DDR_MT46V32M16)
-#include "mt46v32m16.h"
-#elif defined(CONFIG_DDR_HYB25D512160BF)
-#include "hyb25d512160bf.h"
-#elif defined(CONFIG_DDR_K4H511638C)
-#include "k4h511638c.h"
-#else
-#error "INKA4x0 SDRAM: invalid chip type specified!"
-#endif
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void sdram_start (int hi_addr)
-{
- volatile struct mpc5xxx_sdram *sdram =
- (struct mpc5xxx_sdram *)MPC5XXX_SDRAM;
- long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
- /* unlock mode register */
- out_be32(&sdram->ctrl, SDRAM_CONTROL | 0x80000000 | hi_addr_bit);
-
- /* precharge all banks */
- out_be32(&sdram->ctrl, SDRAM_CONTROL | 0x80000002 | hi_addr_bit);
-
-#if SDRAM_DDR
- /* set mode register: extended mode */
- out_be32(&sdram->mode, SDRAM_EMODE);
-
- /* set mode register: reset DLL */
- out_be32(&sdram->mode, SDRAM_MODE | 0x04000000);
-#endif
-
- /* precharge all banks */
- out_be32(&sdram->ctrl, SDRAM_CONTROL | 0x80000002 | hi_addr_bit);
-
- /* auto refresh */
- out_be32(&sdram->ctrl, SDRAM_CONTROL | 0x80000004 | hi_addr_bit);
-
- /* set mode register */
- out_be32(&sdram->mode, SDRAM_MODE);
-
- /* normal operation */
- out_be32(&sdram->ctrl, SDRAM_CONTROL | hi_addr_bit);
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- * use of CONFIG_SYS_SDRAM_BASE. The code does not work if
CONFIG_SYS_SDRAM_BASE
- * is something else than 0x00000000.
- */
-
-phys_size_t initdram (int board_type)
-{
- volatile struct mpc5xxx_mmap_ctl *mm =
- (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR;
- volatile struct mpc5xxx_cdm *cdm =
- (struct mpc5xxx_cdm *) MPC5XXX_CDM;
- volatile struct mpc5xxx_sdram *sdram =
- (struct mpc5xxx_sdram *) MPC5XXX_SDRAM;
- ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- long test1, test2;
-
- /* setup SDRAM chip selects */
- out_be32(&mm->sdram0, 0x0000001c); /* 512MB at 0x0 */
- out_be32(&mm->sdram1, 0x40000000); /* disabled */
-
- /* setup config registers */
- out_be32(&sdram->config1, SDRAM_CONFIG1);
- out_be32(&sdram->config2, SDRAM_CONFIG2);
-
-#if SDRAM_DDR
- /* set tap delay */
- out_be32(&cdm->porcfg, SDRAM_TAPDELAY);
-#endif
-
- /* find RAM size using SDRAM CS0 only */
- sdram_start(0);
- test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
- sdram_start(1);
- test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* memory smaller than 1MB is impossible */
- if (dramsize < (1 << 20)) {
- dramsize = 0;
- }
-
- /* set SDRAM CS0 size according to the amount of RAM found */
- if (dramsize > 0) {
- out_be32(&mm->sdram0, 0x13 +
- __builtin_ffs(dramsize >> 20) - 1);
- } else {
- out_be32(&mm->sdram0, 0); /* disabled */
- }
-
- out_be32(&mm->sdram1, dramsize); /* disabled */
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* retrieve size of memory connected to SDRAM CS0 */
- dramsize = in_be32(&mm->sdram0) & 0xFF;
- if (dramsize >= 0x13) {
- dramsize = (1 << (dramsize - 0x13)) << 20;
- } else {
- dramsize = 0;
- }
-#endif /* CONFIG_SYS_RAMBOOT */
-
- return dramsize;
-}
-
-int checkboard (void)
-{
- puts ("Board: INKA 4X0\n");
- return 0;
-}
-
-void flash_preinit(void)
-{
- volatile struct mpc5xxx_lpb *lpb = (struct mpc5xxx_lpb *)MPC5XXX_LPB;
-
- /*
- * Now, when we are in RAM, enable flash write
- * access for detection process.
- * Note that CS_BOOT (CS0) cannot be cleared when
- * executing in flash.
- */
- clrbits_be32(&lpb->cs0_cfg, 0x1); /* clear RO */
-}
-
-int misc_init_f (void)
-{
- volatile struct mpc5xxx_gpio *gpio =
- (struct mpc5xxx_gpio *) MPC5XXX_GPIO;
- volatile struct mpc5xxx_wu_gpio *wu_gpio =
- (struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
- volatile struct mpc5xxx_gpt *gpt;
- char tmp[10];
- int i, br;
-
- i = getenv_f("brightness", tmp, sizeof(tmp));
- br = (i > 0)
- ? (int) simple_strtoul (tmp, NULL, 10)
- : CONFIG_SYS_BRIGHTNESS;
- if (br > 255)
- br = 255;
-
- /* Initialize GPIO output pins.
- */
- /* Configure GPT as GPIO output (and set them as they control
low-active LEDs */
- for (i = 0; i <= 5; i++) {
- gpt = (struct mpc5xxx_gpt *)(MPC5XXX_GPT + (i * 0x10));
- out_be32(&gpt->emsr, 0x34);
- }
-
- /* Configure GPT7 as PWM timer, 1kHz, no ints. */
- gpt = (struct mpc5xxx_gpt *)(MPC5XXX_GPT + (7 * 0x10));
- out_be32(&gpt->emsr, 0); /* Disable */
- out_be32(&gpt->cir, 0x020000fe);
- out_be32(&gpt->pwmcr, (br << 16));
- out_be32(&gpt->emsr, 0x3); /* Enable PWM mode and start */
-
- /* Configure PSC3_6,7 as GPIO output */
- setbits_be32(&gpio->simple_gpioe, MPC5XXX_GPIO_SIMPLE_PSC3_6 |
- MPC5XXX_GPIO_SIMPLE_PSC3_7);
- setbits_be32(&gpio->simple_ddr, MPC5XXX_GPIO_SIMPLE_PSC3_6 |
- MPC5XXX_GPIO_SIMPLE_PSC3_7);
-
- /* Configure PSC3_9 and GPIO_WKUP6,7 as GPIO output */
- setbits_8(&wu_gpio->enable, MPC5XXX_GPIO_WKUP_6 |
- MPC5XXX_GPIO_WKUP_7 |
- MPC5XXX_GPIO_WKUP_PSC3_9);
- setbits_8(&wu_gpio->ddr, MPC5XXX_GPIO_WKUP_6 |
- MPC5XXX_GPIO_WKUP_7 |
- MPC5XXX_GPIO_WKUP_PSC3_9);
-
- /* Set LR mirror bit because it is low-active */
- setbits_8(&wu_gpio->dvo, MPC5XXX_GPIO_WKUP_7);
-
- /* Reset Coral-P graphics controller */
- setbits_8(&wu_gpio->dvo, MPC5XXX_GPIO_WKUP_PSC3_9);
-
- /* Enable display backlight */
- clrbits_8(&gpio->sint_inten, MPC5XXX_GPIO_SINT_PSC3_8);
- setbits_8(&gpio->sint_gpioe, MPC5XXX_GPIO_SINT_PSC3_8);
- setbits_8(&gpio->sint_ddr, MPC5XXX_GPIO_SINT_PSC3_8);
- setbits_8(&gpio->sint_dvo, MPC5XXX_GPIO_SINT_PSC3_8);
-
- /*
- * Configure three wire serial interface to RTC (PSC1_4,
- * PSC2_4, PSC3_4, PSC3_5)
- */
- setbits_8(&wu_gpio->enable, MPC5XXX_GPIO_WKUP_PSC1_4 |
- MPC5XXX_GPIO_WKUP_PSC2_4);
- setbits_8(&wu_gpio->ddr, MPC5XXX_GPIO_WKUP_PSC1_4 |
- MPC5XXX_GPIO_WKUP_PSC2_4);
- clrbits_8(&wu_gpio->dvo, MPC5XXX_GPIO_WKUP_PSC1_4);
- clrbits_8(&gpio->sint_inten, MPC5XXX_GPIO_SINT_PSC3_4 |
- MPC5XXX_GPIO_SINT_PSC3_5);
- setbits_8(&gpio->sint_gpioe, MPC5XXX_GPIO_SINT_PSC3_4 |
- MPC5XXX_GPIO_SINT_PSC3_5);
- setbits_8(&gpio->sint_ddr, MPC5XXX_GPIO_SINT_PSC3_5);
- clrbits_8(&gpio->sint_dvo, MPC5XXX_GPIO_SINT_PSC3_5);
-
- return 0;
-}
-
-#ifdef CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
- pci_mpc5xxx_init(&hose);
-}
-#endif
diff --git a/board/inka4x0/inkadiag.c b/board/inka4x0/inkadiag.c
deleted file mode 100644
index 0bd12ec..0000000
--- a/board/inka4x0/inkadiag.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * (C) Copyright 2008, 2009 Andreas Pfefferle,
- * DENX Software Engineering, a...@denx.de.
- * (C) Copyright 2009 Detlev Zundel,
- * DENX Software Engineering, d...@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm/io.h>
-#include <common.h>
-#include <config.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-
-#include <command.h>
-
-/* This is needed for the includes in ns16550.h */
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#include <ns16550.h>
-
-#define GPIO_BASE ((u_char *)CONFIG_SYS_CS3_START)
-
-#define DIGIN_TOUCHSCR_MASK 0x00003000 /* Inputs 12-13 */
-#define DIGIN_KEYB_MASK 0x00010000 /* Input 16 */
-
-#define DIGIN_DRAWER_SW1 0x00400000 /* Input 22 */
-#define DIGIN_DRAWER_SW2 0x00800000 /* Input 23 */
-
-#define DIGIO_LED0 0x00000001 /* Output 0 */
-#define DIGIO_LED1 0x00000002 /* Output 1 */
-#define DIGIO_LED2 0x00000004 /* Output 2 */
-#define DIGIO_LED3 0x00000008 /* Output 3 */
-#define DIGIO_LED4 0x00000010 /* Output 4 */
-#define DIGIO_LED5 0x00000020 /* Output 5 */
-
-#define DIGIO_DRAWER1 0x00000100 /* Output 8 */
-#define DIGIO_DRAWER2 0x00000200 /* Output 9 */
-
-#define SERIAL_PORT_BASE ((u_char *)CONFIG_SYS_CS2_START)
-
-#define PSC_OP1_RTS 0x01
-#define PSC_OP0_RTS 0x01
-
-/*
- * Table with supported baudrates (defined in inka4x0.h)
- */
-static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE;
-#define N_BAUDRATES (sizeof(baudrate_table) / sizeof(baudrate_table[0]))
-
-static unsigned int inka_digin_get_input(void)
-{
- return in_8(GPIO_BASE + 0) << 0 | in_8(GPIO_BASE + 1) << 8 |
- in_8(GPIO_BASE + 2) << 16 | in_8(GPIO_BASE + 3) << 24;
-}
-
-#define LED_HIGH(NUM) \
- do { \
- setbits_be32((unsigned *)MPC5XXX_GPT##NUM##_ENABLE, 0x10); \
- } while (0)
-
-#define LED_LOW(NUM) \
- do { \
- clrbits_be32((unsigned *)MPC5XXX_GPT##NUM##_ENABLE, 0x10); \
- } while (0)
-
-#define CHECK_LED(NUM) \
- do { \
- if (state & (1 << NUM)) { \
- LED_HIGH(NUM); \
- } else { \
- LED_LOW(NUM); \
- } \
- } while (0)
-
-static void inka_digio_set_output(unsigned int state, int which)
-{
- volatile struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio
*)MPC5XXX_GPIO;
-
- if (which == 0) {
- /* other */
- CHECK_LED(0);
- CHECK_LED(1);
- CHECK_LED(2);
- CHECK_LED(3);
- CHECK_LED(4);
- CHECK_LED(5);
- } else {
- if (which == 1) {
- /* drawer1 */
- if (state) {
- clrbits_be32(&gpio->simple_dvo, 0x1000);
- udelay(1);
- setbits_be32(&gpio->simple_dvo, 0x1000);
- } else {
- setbits_be32(&gpio->simple_dvo, 0x1000);
- udelay(1);
- clrbits_be32(&gpio->simple_dvo, 0x1000);
- }
- }
- if (which == 2) {
- /* drawer 2 */
- if (state) {
- clrbits_be32(&gpio->simple_dvo, 0x2000);
- udelay(1);
- setbits_be32(&gpio->simple_dvo, 0x2000);
- } else {
- setbits_be32(&gpio->simple_dvo, 0x2000);
- udelay(1);
- clrbits_be32(&gpio->simple_dvo, 0x2000);
- }
- }
- }
- udelay(1);
-}
-
-static int do_inkadiag_io(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[]) {
- unsigned int state, val;
-
- switch (argc) {
- case 3:
- /* Write a value */
- val = simple_strtol(argv[2], NULL, 16);
-
- if (strcmp(argv[1], "drawer1") == 0) {
- inka_digio_set_output(val, 1);
- } else if (strcmp(argv[1], "drawer2") == 0) {
- inka_digio_set_output(val, 2);
- } else if (strcmp(argv[1], "other") == 0)
- inka_digio_set_output(val, 0);
- else {
- printf("Invalid argument: %s\n", argv[1]);
- return -1;
- }
- /* fall through */
- case 2:
- /* Read a value */
- state = inka_digin_get_input();
-
- if (strcmp(argv[1], "drawer1") == 0) {
- val = (state & DIGIN_DRAWER_SW1) >>
(ffs(DIGIN_DRAWER_SW1) - 1);
- } else if (strcmp(argv[1], "drawer2") == 0) {
- val = (state & DIGIN_DRAWER_SW2) >>
(ffs(DIGIN_DRAWER_SW2) - 1);
- } else if (strcmp(argv[1], "other") == 0) {
- val = ((state & DIGIN_KEYB_MASK) >>
(ffs(DIGIN_KEYB_MASK) - 1))
- | (state & DIGIN_TOUCHSCR_MASK) >>
(ffs(DIGIN_TOUCHSCR_MASK) - 2);
- } else {
- printf("Invalid argument: %s\n", argv[1]);
- return -1;
- }
- printf("exit code: 0x%X\n", val);
- return 0;
- default:
- return cmd_usage(cmdtp);
- }
-
- return -1;
-}
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static int ser_init(volatile struct mpc5xxx_psc *psc, int baudrate)
-{
- unsigned long baseclk;
- int div;
-
- /* reset PSC */
- out_8(&psc->command, PSC_SEL_MODE_REG_1);
-
- /* select clock sources */
-
- out_be16(&psc->psc_clock_select, 0);
- baseclk = (gd->arch.ipb_clk + 16) / 32;
-
- /* switch to UART mode */
- out_be32(&psc->sicr, 0);
-
- /* configure parity, bit length and so on */
-
- out_8(&psc->mode, PSC_MODE_8_BITS | PSC_MODE_PARNONE);
- out_8(&psc->mode, PSC_MODE_ONE_STOP);
-
- /* set up UART divisor */
- div = (baseclk + (baudrate / 2)) / baudrate;
- out_8(&psc->ctur, (div >> 8) & 0xff);
- out_8(&psc->ctlr, div & 0xff);
-
- /* disable all interrupts */
- out_be16(&psc->psc_imr, 0);
-
- /* reset and enable Rx/Tx */
- out_8(&psc->command, PSC_RST_RX);
- out_8(&psc->command, PSC_RST_TX);
- out_8(&psc->command, PSC_RX_ENABLE | PSC_TX_ENABLE);
-
- return 0;
-}
-
-static void ser_putc(volatile struct mpc5xxx_psc *psc, const char c)
-{
- /* Wait 1 second for last character to go. */
- int i = 0;
-
- while (!(psc->psc_status & PSC_SR_TXEMP) && (i++ < 1000000/10))
- udelay(10);
- psc->psc_buffer_8 = c;
-
-}
-
-static int ser_getc(volatile struct mpc5xxx_psc *psc)
-{
- /* Wait for a character to arrive. */
- int i = 0;
-
- while (!(in_be16(&psc->psc_status) & PSC_SR_RXRDY) && (i++ <
1000000/10))
- udelay(10);
-
- return in_8(&psc->psc_buffer_8);
-}
-
-static int do_inkadiag_serial(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[]) {
- volatile struct NS16550 *uart;
- volatile struct mpc5xxx_psc *psc;
- unsigned int num, mode;
- int combrd, baudrate, i, j, len;
- int address;
-
- if (argc < 5)
- return cmd_usage(cmdtp);
-
- argc--;
- argv++;
-
- num = simple_strtol(argv[0], NULL, 0);
- if (num < 0 || num > 11) {
- printf("invalid argument for num: %d\n", num);
- return -1;
- }
-
- mode = simple_strtol(argv[1], NULL, 0);
-
- combrd = 0;
- baudrate = simple_strtoul(argv[2], NULL, 10);
- for (i=0; i<N_BAUDRATES; ++i) {
- if (baudrate == baudrate_table[i])
- break;
- }
- if (i == N_BAUDRATES) {
- printf("## Baudrate %d bps not supported\n",
- baudrate);
- return 1;
- }
- combrd = 115200 / baudrate;
-
- uart = (struct NS16550 *)(SERIAL_PORT_BASE + (num << 3));
-
- printf("Testing uart %d.\n\n", num);
-
- if ((num >= 0) && (num <= 7)) {
- if (mode & 1) {
- /* turn on 'loopback' mode */
- out_8(&uart->mcr, UART_MCR_LOOP);
- } else {
- /*
- * establish the UART's operational parameters
- * set DLAB=1, so rbr accesses DLL
- */
- out_8(&uart->lcr, UART_LCR_DLAB);
- /* set baudrate */
- out_8(&uart->rbr, combrd);
- /* set data-format: 8-N-1 */
- out_8(&uart->lcr, UART_LCR_WLS_8);
- }
-
- if (mode & 2) {
- /* set request to send */
- out_8(&uart->mcr, UART_MCR_RTS);
- udelay(10);
- /* check clear to send */
- if ((in_8(&uart->msr) & UART_MSR_CTS) == 0x00)
- return -1;
- }
- if (mode & 4) {
- /* set data terminal ready */
- out_8(&uart->mcr, UART_MCR_DTR);
- udelay(10);
- /* check data set ready and carrier detect */
- if ((in_8(&uart->msr) & (UART_MSR_DSR | UART_MSR_DCD))
- != (UART_MSR_DSR | UART_MSR_DCD))
- return -1;
- }
-
- /* write each message-character, read it back, and display it */
- for (i = 0, len = strlen(argv[3]); i < len; ++i) {
- j = 0;
- while ((in_8(&uart->lsr) & UART_LSR_THRE) == 0x00) {
- if (j++ > CONFIG_SYS_HZ)
- break;
- udelay(10);
- }
- out_8(&uart->rbr, argv[3][i]);
- j = 0;
- while ((in_8(&uart->lsr) & UART_LSR_DR) == 0x00) {
- if (j++ > CONFIG_SYS_HZ)
- break;
- udelay(10);
- }
- printf("%c", in_8(&uart->rbr));
- }
- printf("\n\n");
- out_8(&uart->mcr, 0x00);
- } else {
- address = 0;
-
- switch (num) {
- case 8:
- address = MPC5XXX_PSC6;
- break;
- case 9:
- address = MPC5XXX_PSC3;
- break;
- case 10:
- address = MPC5XXX_PSC2;
- break;
- case 11:
- address = MPC5XXX_PSC1;
- break;
- }
- psc = (struct mpc5xxx_psc *)address;
- ser_init(psc, simple_strtol(argv[2], NULL, 0));
- if (mode & 2) {
- /* set request to send */
- out_8(&psc->op0, PSC_OP0_RTS);
- udelay(10);
- /* check clear to send */
- if ((in_8(&psc->ip) & PSC_IPCR_CTS) == 0)
- return -1;
- }
- len = strlen(argv[3]);
- for (i = 0; i < len; ++i) {
- ser_putc(psc, argv[3][i]);
- printf("%c", ser_getc(psc));
- }
- printf("\n\n");
- }
- return 0;
-}
-
-#define BUZZER_GPT (MPC5XXX_GPT + 0x60) /* GPT6 */
-static void buzzer_turn_on(unsigned int freq)
-{
- volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)(BUZZER_GPT);
-
- const u32 prescale = gd->arch.ipb_clk / freq / 128;
- const u32 count = 128;
- const u32 width = 64;
-
- gpt->cir = (prescale << 16) | count;
- gpt->pwmcr = width << 16;
- gpt->emsr = 3; /* Timer enabled for PWM */
-}
-
-static void buzzer_turn_off(void)
-{
- volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)(BUZZER_GPT);
-
- gpt->emsr = 0;
-}
-
-static int do_inkadiag_buzzer(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[]) {
-
- unsigned int period, freq;
- int prev, i;
-
- if (argc != 3)
- return cmd_usage(cmdtp);
-
- argc--;
- argv++;
-
- period = simple_strtol(argv[0], NULL, 0);
- if (!period)
- printf("Zero period is senseless\n");
- argc--;
- argv++;
-
- freq = simple_strtol(argv[0], NULL, 0);
- /* avoid zero prescale in buzzer_turn_on() */
- if (freq > gd->arch.ipb_clk / 128) {
- printf("%dHz exceeds maximum (%ldHz)\n", freq,
- gd->arch.ipb_clk / 128);
- } else if (!freq)
- printf("Zero frequency is senseless\n");
- else
- buzzer_turn_on(freq);
-
- clear_ctrlc();
- prev = disable_ctrlc(0);
-
- printf("Buzzing for %d ms. Type ^C to abort!\n\n", period);
-
- i = 0;
- while (!ctrlc() && (i++ < CONFIG_SYS_HZ))
- udelay(period);
-
- clear_ctrlc();
- disable_ctrlc(prev);
-
- buzzer_turn_off();
-
- return 0;
-}
-
-static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, int argc, char * const
argv[]);
-
-cmd_tbl_t cmd_inkadiag_sub[] = {
- U_BOOT_CMD_MKENT(io, 1, 1, do_inkadiag_io, "read digital input",
- "<drawer1|drawer2|other> [value] - get or set specified signal"),
- U_BOOT_CMD_MKENT(serial, 4, 1, do_inkadiag_serial, "test serial port",
- "<num> <mode> <baudrate> <msg> - test uart num [0..11] in mode\n"
- "and baudrate with msg"),
- U_BOOT_CMD_MKENT(buzzer, 2, 1, do_inkadiag_buzzer, "activate buzzer",
- "<period> <freq> - turn buzzer on for period ms with freq hz"),
- U_BOOT_CMD_MKENT(help, 4, 1, do_inkadiag_help, "get help",
- "[command] - get help for command"),
-};
-
-static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag,
- int argc, char * const argv[]) {
- extern int _do_help (cmd_tbl_t *cmd_start, int cmd_items,
- cmd_tbl_t *cmdtp, int flag,
- int argc, char * const argv[]);
- /* do_help prints command name - we prepend inkadiag to our
subcommands! */
-#ifdef CONFIG_SYS_LONGHELP
- puts ("inkadiag ");
-#endif
- return _do_help(&cmd_inkadiag_sub[0],
- ARRAY_SIZE(cmd_inkadiag_sub), cmdtp, flag, argc, argv);
-}
-
-static int do_inkadiag(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[]) {
- cmd_tbl_t *c;
-
- c = find_cmd_tbl(argv[1], &cmd_inkadiag_sub[0],
ARRAY_SIZE(cmd_inkadiag_sub));
-
- if (c) {
- argc--;
- argv++;
- return c->cmd(c, flag, argc, argv);
- } else {
- /* Unrecognized command */
- return cmd_usage(cmdtp);
- }
-}
-
-U_BOOT_CMD(inkadiag, 6, 1, do_inkadiag,
- "inkadiag - inka diagnosis\n",
- "[inkadiag what ...]\n"
- " - perform a diagnosis on inka hardware\n"
- "'inkadiag' performs hardware tests.");
diff --git a/board/inka4x0/k4h511638c.h b/board/inka4x0/k4h511638c.h
deleted file mode 100644
index 054ddaf..0000000
--- a/board/inka4x0/k4h511638c.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2007 Semihalf
- * Written by Marian Balakowicz <m...@semihalf.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#define SDRAM_DDR 1 /* is DDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE 0x018D0000
-#define SDRAM_EMODE 0x40090000
-#define SDRAM_CONTROL 0x714F0F00
-#define SDRAM_CONFIG1 0x73722930
-#define SDRAM_CONFIG2 0x46770000
-#define SDRAM_TAPDELAY 0x10000000
diff --git a/board/inka4x0/mt46v16m16-75.h b/board/inka4x0/mt46v16m16-75.h
deleted file mode 100644
index 23fc6f0..0000000
--- a/board/inka4x0/mt46v16m16-75.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jo...@motorola.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#define SDRAM_DDR 1 /* is DDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE 0x018D0000
-#define SDRAM_EMODE 0x40090000
-#define SDRAM_CONTROL 0x714F0F00
-#define SDRAM_CONFIG1 0x73722930
-#define SDRAM_CONFIG2 0x47770000
-#define SDRAM_TAPDELAY 0x10000000
diff --git a/board/inka4x0/mt46v32m16-75.h b/board/inka4x0/mt46v32m16-75.h
deleted file mode 100644
index f16f450..0000000
--- a/board/inka4x0/mt46v32m16-75.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2007 Semihalf
- * Written by Marian Balakowicz <m...@semihalf.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#define SDRAM_DDR 1 /* is DDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE 0x018D0000
-#define SDRAM_EMODE 0x40090000
-#define SDRAM_CONTROL 0x714F0F00
-#define SDRAM_CONFIG1 0x73711930
-#define SDRAM_CONFIG2 0x46770000
-#define SDRAM_TAPDELAY 0x10000000
diff --git a/board/inka4x0/mt48lc16m16a2-75.h b/board/inka4x0/mt48lc16m16a2-75.h
deleted file mode 100644
index 0133eaa..0000000
--- a/board/inka4x0/mt48lc16m16a2-75.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jo...@motorola.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#define SDRAM_DDR 0 /* is SDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE 0x00CD0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xD2322800
-#define SDRAM_CONFIG2 0x8AD70000
diff --git a/configs/inka4x0_defconfig b/configs/inka4x0_defconfig
deleted file mode 100644
index 4c1016a..0000000
--- a/configs/inka4x0_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_INKA4X0=y
-# CONFIG_CMD_SETEXPR is not set
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
deleted file mode 100644
index c7bf531..0000000
--- a/include/configs/inka4x0.h
+++ /dev/null
@@ -1,413 +0,0 @@
-/*
- * (C) Copyright 2009
- * Detlev Zundel, DENX Software Engineering, d...@denx.de.
- *
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, w...@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */
-#define CONFIG_INKA4X0 1 /* INKA4x0 board */
-
-/*
- * Valid values for CONFIG_SYS_TEXT_BASE are:
- * 0xFFE00000 boot low
- * 0x00100000 boot from RAM (for testing only)
- */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE 0xFFE00000 /* Standard: boot low */
-#endif
-#define CONFIG_SYS_LDSCRIPT
"arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds"
-
-#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz
*/
-
-#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f()
*/
-
-#define CONFIG_HIGH_BATS 1 /* High BATs supported
*/
-
-/*
- * Serial console configuration
- */
-#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200,
230400 }
-
-/*
- * PCI Mapping:
- * 0x40000000 - 0x4fffffff - PCI Memory
- * 0x50000000 - 0x50ffffff - PCI IO Space
- */
-#define CONFIG_PCI 1
-#define CONFIG_PCI_PNP 1
-#define CONFIG_PCI_SCAN_SHOW 1
-#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
-
-#define CONFIG_PCI_MEM_BUS 0x40000000
-#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
-#define CONFIG_PCI_MEM_SIZE 0x10000000
-
-#define CONFIG_PCI_IO_BUS 0x50000000
-#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
-#define CONFIG_PCI_IO_SIZE 0x01000000
-
-#define CONFIG_SYS_XLB_PIPELINING 1
-
-/* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SNTP
-#define CONFIG_CMD_USB
-
-#define CONFIG_TIMESTAMP 1 /* Print image info with
timestamp */
-
-#if (CONFIG_SYS_TEXT_BASE == 0xFFE00000) /* Boot low */
-# define CONFIG_SYS_LOWBOOT 1
-#endif
-
-/*
- * Autobooting
- */
-#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_IPADDR 192.168.100.2
-#define CONFIG_SERVERIP 192.168.100.1
-#define CONFIG_NETMASK 255.255.255.0
-#define HOSTNAME inka4x0
-#define CONFIG_BOOTFILE "/tftpboot/inka4x0/uImage"
-#define CONFIG_ROOTPATH "/opt/eldk/ppc_6xx"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addcons=setenv bootargs ${bootargs} " \
- "console=ttyS0,${baudrate}\0" \
- "flash_nfs=run nfsargs addip addcons;" \
- "bootm ${kernel_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};" \
- "run nfsargs addip addcons;bootm\0" \
- "enable_disp=mw.l 100000 04000000 1;" \
- "cp.l 100000 f0000b20 1;" \
- "cp.l 100000 f0000b28 1\0" \
- "ideargs=setenv bootargs root=/dev/hda1 rw\0" \
- "ide_boot=ext2load ide 0:1 200000 uImage;" \
- "run ideargs addip addcons enable_disp;bootm\0" \
- "brightness=255\0" \
- ""
-
-#define CONFIG_BOOTCOMMAND "run ide_boot"
-
-/*
- * IPB Bus clocking configuration.
- */
-#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz
speed */
-
-/*
- * Flash configuration
- */
-#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_SYS_FLASH_BASE 0xffe00000
-#define CONFIG_SYS_FLASH_SIZE 0x00200000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip
*/
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x
faster) */
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x4000)
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_SECT_SIZE 0x2000
-#define CONFIG_ENV_OVERWRITE 1
-#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect
.ppcenv */
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_MBAR 0xF0000000
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
-
-/*
- * SDRAM controller configuration
- */
-#undef CONFIG_SDR_MT48LC16M16A2
-#undef CONFIG_DDR_MT46V16M16
-#undef CONFIG_DDR_MT46V32M16
-#undef CONFIG_DDR_HYB25D512160BF
-#define CONFIG_DDR_K4H511638C
-
-/* Use ON-Chip SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
-
-/* preserve space for the post_word at end of on-chip SRAM */
-#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4)
-
-#ifdef CONFIG_POST
-#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE
-#else
-#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
-#endif
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE -
GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-# define CONFIG_SYS_RAMBOOT 1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for
Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for
malloc() */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map
for Linux */
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC5xxx_FEC 1
-#define CONFIG_MPC5xxx_FEC_MII100
-/*
- * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
- */
-/* #define CONFIG_MPC5xxx_FEC_MII10 */
-#define CONFIG_PHY_ADDR 0x00
-#define CONFIG_MII
-
-/*
- * GPIO configuration
- *
- * use CS1 as gpio_wkup_6 output
- * Bit 0 (mask: 0x80000000): 0
- * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
- * 00 -> No Alternatives, I2C1 is used for onboard EEPROM
- * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1 do not use on TQM5200 with onboard
- * EEPROM
- * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
- * use PSC2 as UART: Bits 24-27 (mask: 0x00000070): 0100
- * use PSC3 as UART: Bits 20-23 (mask: 0x00000700): 0100
- * use PSC6 as UART: Bits 9-11 (mask: 0x00700000): 0101
- */
-#define CONFIG_SYS_GPS_PORT_CONFIG 0x01501444
-
-/*
- * RTC configuration
- */
-#define CONFIG_RTC_RTC4543 1 /* use external RTC */
-
-/*
- * Software (bit-bang) three wire serial configuration
- *
- * Note that we need the ifdefs because otherwise compilation of
- * mkimage.c fails.
- */
-#define CONFIG_SOFT_TWS 1
-
-#ifdef TWS_IMPLEMENTATION
-#include <mpc5xxx.h>
-#include <asm/io.h>
-
-#define TWS_CE MPC5XXX_GPIO_WKUP_PSC1_4 /* GPIO_WKUP_0 */
-#define TWS_WR MPC5XXX_GPIO_WKUP_PSC2_4 /* GPIO_WKUP_1 */
-#define TWS_DATA MPC5XXX_GPIO_SINT_PSC3_4 /* GPIO_SINT_0 */
-#define TWS_CLK MPC5XXX_GPIO_SINT_PSC3_5 /* GPIO_SINT_1 */
-
-static inline void tws_ce(unsigned bit)
-{
- struct mpc5xxx_wu_gpio *wu_gpio =
- (struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
- if (bit)
- setbits_8(&wu_gpio->dvo, TWS_CE);
- else
- clrbits_8(&wu_gpio->dvo, TWS_CE);
-}
-
-static inline void tws_wr(unsigned bit)
-{
- struct mpc5xxx_wu_gpio *wu_gpio =
- (struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
- if (bit)
- setbits_8(&wu_gpio->dvo, TWS_WR);
- else
- clrbits_8(&wu_gpio->dvo, TWS_WR);
-}
-
-static inline void tws_clk(unsigned bit)
-{
- struct mpc5xxx_gpio *gpio =
- (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
- if (bit)
- setbits_8(&gpio->sint_dvo, TWS_CLK);
- else
- clrbits_8(&gpio->sint_dvo, TWS_CLK);
-}
-
-static inline void tws_data(unsigned bit)
-{
- struct mpc5xxx_gpio *gpio =
- (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
- if (bit)
- setbits_8(&gpio->sint_dvo, TWS_DATA);
- else
- clrbits_8(&gpio->sint_dvo, TWS_DATA);
-}
-
-static inline unsigned tws_data_read(void)
-{
- struct mpc5xxx_gpio *gpio =
- (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
- return !!(in_8(&gpio->sint_ival) & TWS_DATA);
-}
-
-static inline void tws_data_config_output(unsigned output)
-{
- struct mpc5xxx_gpio *gpio =
- (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
- if (output)
- setbits_8(&gpio->sint_ddr, TWS_DATA);
- else
- clrbits_8(&gpio->sint_ddr, TWS_DATA);
-}
-#endif /* TWS_IMPLEMENTATION */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /*
Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args
*/
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot
Argument Buffer Size */
-
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs
*/
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above
value */
-#endif
-
-/* Enable an alternate, more extensive memory test */
-#define CONFIG_SYS_ALT_MEMTEST
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM
*/
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address
*/
-
-/*
- * Enable loopw command.
- */
-#define CONFIG_LOOPW
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL HID0_ICE
-
-#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
-#define CONFIG_SYS_BOOTCS_CFG 0x00087800 /* for pci_clk = 66 MHz */
-#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
-
-/* 32Mbit SRAM @0x30000000 */
-#define CONFIG_SYS_CS1_START 0x30000000
-#define CONFIG_SYS_CS1_SIZE 0x00400000
-#define CONFIG_SYS_CS1_CFG 0x31800 /* for pci_clk = 33 MHz */
-
-/* 2 quad UART @0x80000000 (MBAR is relocated to 0xF0000000) */
-#define CONFIG_SYS_CS2_START 0x80000000
-#define CONFIG_SYS_CS2_SIZE 0x0001000
-#define CONFIG_SYS_CS2_CFG 0x21800 /* for pci_clk = 33 MHz */
-
-/* GPIO in @0x30400000 */
-#define CONFIG_SYS_CS3_START 0x30400000
-#define CONFIG_SYS_CS3_SIZE 0x00100000
-#define CONFIG_SYS_CS3_CFG 0x31800 /* for pci_clk = 33 MHz */
-
-#define CONFIG_SYS_CS_BURST 0x00000000
-#define CONFIG_SYS_CS_DEADCYCLE 0x33333333
-
-/*-----------------------------------------------------------------------
- * USB stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_USB_OHCI
-#define CONFIG_USB_CLOCK 0x00015555
-#define CONFIG_USB_CONFIG 0x00001000
-#define CONFIG_USB_STORAGE
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff Supports IDE harddisk
- *-----------------------------------------------------------------------
- */
-
-#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-
-#define CONFIG_IDE_PREINIT
-
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus
*/
-#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 1 drive per IDE bus
*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
-#define CONFIG_SYS_ATA_DATA_OFFSET 0x0060 /* Offset for data I/O
*/
-#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) /* Offset for
normal register accesses */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x005C /* Offset for alternate
registers */
-#define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers
*/
-
-#define CONFIG_ATAPI 1
-
-#define CONFIG_SYS_BRIGHTNESS 0xFF /* LCD Default Brightness (255
= off) */
-
-#endif /* __CONFIG_H */
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
