Hi Joe, Le Wed, 12 Aug 2015 12:39:46 -0500, Joe Hershberger <joe.hershber...@gmail.com> a écrit :
> Hi Albert, > > On Sun, Jul 26, 2015 at 4:53 PM, Albert ARIBAUD (3ADEV) > <albert.arib...@3adev.fr> wrote: > > There already is an environment variable 'tftptimeout' > > for setting individuabl block query timeout value, but > > there is none for setting the maximum TFTP timeout count, > > which can also help with unreliable network, TFTP server, > > or client hardware. > > > > Add environment variable 'tftptimeoutcountmax'. As per the > > comments about the global variable tftp_timeout_count_max, > > make sure tftptimeoutcountmax is nonnegative. > > > > Signed-off-by: Albert ARIBAUD (3ADEV) <albert.arib...@3adev.fr> > > This patch seems to break the bf527-ezkit target. Just a bit too much code. > > +(bf527-ezkit) actual: 262240 bytes > +(bf527-ezkit) excess: 96 bytes > > Anything you can do? Maybe Sonic has some advise or can recommend > something else to disable on blackfin. These targets are fairly > tedious because they are always so close to breaking for any little > reason. Hmm... I'll see if I can rewrite the patch, but seeing as it is fairly simple, it might require drastic change like not warning if going below the RFC's 1000 ms limit. > -Joe Cordialement, Albert ARIBAUD 3ADEV _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
