Hi Albert, On Sun, Jul 26, 2015 at 4:53 PM, Albert ARIBAUD (3ADEV) <albert.arib...@3adev.fr> wrote: > There already is an environment variable 'tftptimeout' > for setting individuabl block query timeout value, but > there is none for setting the maximum TFTP timeout count, > which can also help with unreliable network, TFTP server, > or client hardware. > > Add environment variable 'tftptimeoutcountmax'. As per the > comments about the global variable tftp_timeout_count_max, > make sure tftptimeoutcountmax is nonnegative. > > Signed-off-by: Albert ARIBAUD (3ADEV) <albert.arib...@3adev.fr>
This patch seems to break the bf527-ezkit target. Just a bit too much code. +(bf527-ezkit) actual: 262240 bytes +(bf527-ezkit) excess: 96 bytes Anything you can do? Maybe Sonic has some advise or can recommend something else to disable on blackfin. These targets are fairly tedious because they are always so close to breaking for any little reason. -Joe _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot