Hi Yoshinori, > On Jun 1, 2015, at 09:22 , Yoshinori Sato <ys...@users.sourceforge.jp> wrote: > > Currently implement always swap for big-endian value. > So doesn't work big-endian environment. > > Signed-off-by: Yoshinori Sato <ys...@users.sourceforge.jp> > --- > drivers/mmc/mmc_spi.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/mmc/mmc_spi.c b/drivers/mmc/mmc_spi.c > index 5b5b33a..9032a73 100644 > --- a/drivers/mmc/mmc_spi.c > +++ b/drivers/mmc/mmc_spi.c > @@ -11,7 +11,7 @@ > #include <spi.h> > #include <crc.h> > #include <linux/crc7.h> > -#include <linux/byteorder/swab.h> > +#include <asm/byteorder.h> > > /* MMC/SD in SPI mode reports R1 status always */ > #define R1_SPI_IDLE (1 << 0) > @@ -91,7 +91,7 @@ static uint mmc_spi_readdata(struct mmc *mmc, void *xbuf, > spi_xfer(spi, bsize * 8, NULL, buf, 0); > spi_xfer(spi, 2 * 8, NULL, &crc, 0); > #ifdef CONFIG_MMC_SPI_CRC_ON > - if (swab16(cyg_crc16(buf, bsize)) != crc) { > + if (be_to_cpu16(cyg_crc16(buf, bsize)) != crc) { > debug("%s: CRC error\n", mmc->cfg->name); > r1 = R1_SPI_COM_CRC; > break; > @@ -120,7 +120,7 @@ static uint mmc_spi_writedata(struct mmc *mmc, const void > *xbuf, > tok[1] = multi ? SPI_TOKEN_MULTI_WRITE : SPI_TOKEN_SINGLE; > while (bcnt--) { > #ifdef CONFIG_MMC_SPI_CRC_ON > - crc = swab16(cyg_crc16((u8 *)buf, bsize)); > + crc = cpu_to_be16(cyg_crc16((u8 *)buf, bsize)); > #endif > spi_xfer(spi, 2 * 8, tok, NULL, 0); > spi_xfer(spi, bsize * 8, buf, NULL, 0); > @@ -193,7 +193,7 @@ static int mmc_spi_request(struct mmc *mmc, struct > mmc_cmd *cmd, > } else if (cmd->resp_type == MMC_RSP_R2) { > r1 = mmc_spi_readdata(mmc, cmd->response, 1, 16); > for (i = 0; i < 4; i++) > - cmd->response[i] = swab32(cmd->response[i]); > + cmd->response[i] = be32_to_cpu(cmd->response[i]); > debug("r128 %x %x %x %x\n", cmd->response[0], cmd->response[1], > cmd->response[2], cmd->response[3]); > } else if (!data) { > @@ -205,7 +205,7 @@ static int mmc_spi_request(struct mmc *mmc, struct > mmc_cmd *cmd, > case SD_CMD_SEND_IF_COND: > case MMC_CMD_SPI_READ_OCR: > spi_xfer(spi, 4 * 8, NULL, cmd->response, 0); > - cmd->response[0] = swab32(cmd->response[0]); > + cmd->response[0] = be32_to_cpu(cmd->response[0]); > debug("r32 %x\n", cmd->response[0]); > break; > case MMC_CMD_SEND_STATUS: > -- > 2.1.4 >
Applied, thanks. — Pantelis _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot