On 08/06/15 07:43, Peng Fan wrote:
Move TARGET_xx Kconfig option based on mx6 to arch/arm/cpu/armv7/mx6/Kconfig.
Add enable "CONFIG_ARCH_MX6" for boards based on mx6.
Then we can choose target boards using "make ARCH=arm menuconfig"
with ARCH_MX6 defined.
If using original way, we have no chance to enable ARCH_MX6 when
"make menuconfig". Even define CONFIG_ARCH_MX6=y in xx_defconfig,
kconfig will complains "arch/../configs/platinum_titanium_defconfig:3:
warning: override: TARGET_PLATINUM_TITANIUM changes choice state"
Signed-off-by: Peng Fan <peng....@freescale.com>
Cc: Stefano Babic <sba...@denx.de>
Cc: Heiko Schocher <h...@denx.de>
Cc: Tim Harvey <thar...@gateworks.com>
Cc: Eric Bénard <e...@eukrea.com>
Cc: Fabio Estevam <fabio.este...@freescale.com>
Cc: Eric Nelson <eric.nel...@boundarydevices.com>
Cc: Marek Vasut <ma...@denx.de>
Cc: Christian Gmeiner <christian.gmei...@gmail.com>
Cc: Stefan Roese <s...@denx.de>
Cc: Soeren Moch <sm...@web.de>
Cc: Otavio Salvador <ota...@ossystems.com.br>
Signed-off-by: Peng Fan <peng....@freescale.com>
---
[...]
index dce7ffc..b7481e7 100644
--- a/arch/arm/cpu/armv7/mx6/Kconfig
+++ b/arch/arm/cpu/armv7/mx6/Kconfig
@@ -46,6 +46,113 @@ config TARGET_SECOMX6
config TARGET_TQMA6
bool "TQ Systems TQMa6 board"
+config TARGET_UDOO
+ bool "Support udoo"
+ select CPU_V7
+ select SUPPORT_SPL
+
+config TARGET_OT1200
+ bool "Bachmann OT1200"
+ select CPU_V7
+ select SUPPORT_SPL
+
+config TARGET_WANDBOARD
+ bool "Support wandboard"
+ select CPU_V7
+ select SUPPORT_SPL
+
+config TARGET_WARP
+ bool "Support WaRP"
+ select CPU_V7
+
+config TARGET_MX6CUBOXI
+ bool "Support Solid-run mx6 boards"
+ select CPU_V7
+ select SUPPORT_SPL
+
+config TARGET_MX6SLEVK
+ bool "Support mx6slevk"
+ select CPU_V7
+
+config TARGET_MX6SXSABRESD
+ bool "Support mx6sxsabresd"
+ select CPU_V7
+ select SUPPORT_SPL
+ select DM
+ select DM_THERMAL
+
+config TARGET_MX6UL_14X14_EVK
+ bool "Support mx6ul_14x14_evk"
+ select CPU_V7
+ select DM
+ select DM_THERMAL
+ select SUPPORT_SPL
+
+config TARGET_MX6QARM2
+ bool "Support mx6qarm2"
+ select CPU_V7
+
+config TARGET_MX6QSABREAUTO
+ bool "Support mx6qsabreauto"
+ select CPU_V7
+ select DM
+ select DM_THERMAL
+
+config TARGET_MX6SABRESD
+ bool "Support mx6sabresd"
+ select CPU_V7
+ select SUPPORT_SPL
+ select DM
+ select DM_THERMAL
+
+config TARGET_GW_VENTANA
+ bool "Support gw_ventana"
+ select CPU_V7
+ select SUPPORT_SPL
+
+config TARGET_TITANIUM
+ bool "Support titanium"
+ select CPU_V7
+
+config TARGET_NITROGEN6X
+ bool "Support nitrogen6x"
+ select CPU_V7
+
+config TARGET_CGTQMX6EVAL
+ bool "Support cgtqmx6eval"
+ select CPU_V7
+
+config TARGET_EMBESTMX6BOARDS
+ bool "Support embestmx6boards"
+ select CPU_V7
+
+config TARGET_ARISTAINETOS
+ bool "Support aristainetos"
+ select CPU_V7
+
+config TARGET_ARISTAINETOS2
+ bool "Support aristainetos2"
+ select CPU_V7
+
+config TARGET_KOSAGI_NOVENA
+ bool "Support Kosagi Novena"
+ select CPU_V7
+ select SUPPORT_SPL
+
+config TARGET_TBS2910
+ bool "Support tbs2910"
+ select CPU_V7
+
+config TARGET_PLATINUM_PICON
+ bool "Support platinum-picon"
+ select CPU_V7
+ select SUPPORT_SPL
+
+config TARGET_PLATINUM_TITANIUM
+ bool "Support platinum-titanium"
+ select CPU_V7
+ select SUPPORT_SPL
+
endchoice
config SYS_SOC
@@ -53,5 +160,26 @@ config SYS_SOC
source "board/seco/Kconfig"
source "board/tqc/tqma6/Kconfig"
+source "board/udoo/Kconfig"
+source "board/bachmann/ot1200/Kconfig"
+source "board/wandboard/Kconfig"
+source "board/warp/Kconfig"
+source "board/compulab/cm_fx6/Kconfig"
+source "board/solidrun/mx6cuboxi/Kconfig"
+source "board/freescale/mx6qarm2/Kconfig"
+source "board/freescale/mx6qsabreauto/Kconfig"
+source "board/freescale/mx6sabresd/Kconfig"
+source "board/freescale/mx6slevk/Kconfig"
+source "board/freescale/mx6sxsabresd/Kconfig"
+source "board/freescale/mx6ul_14x14_evk/Kconfig"
+source "board/gateworks/gw_ventana/Kconfig"
+source "board/barco/platinum/Kconfig"
+source "board/barco/titanium/Kconfig"
+source "board/boundary/nitrogen6x/Kconfig"
+source "board/congatec/cgtqmx6eval/Kconfig"
+source "board/embest/mx6boards/Kconfig"
+source "board/aristainetos/Kconfig"
+source "board/kosagi/novena/Kconfig"
+source "board/tbs/tbs2910/Kconfig"
endif
[...]
I would suggest to sort the config options and include files alphabetically.
Also I think we don't need "Support" in the board select options, unfortunately
this
is already not consistent in arch/arm/cpu/armv7/mx6/Kconfig .
Besides that:
Acked-by: Soeren Moch <sm...@web.de>
Regards,
Soeren
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
