Hi Wolfgang, On Friday 17 July 2009 23:45:02 Wolfgang Denk wrote: > > > A bug was introduced by commit e94e460c6e8741f42dab6d8dd4b596ba5d9d79ae > > > which affected non-MPC83xx/85xx/86xx ppc boards which had > > > CONFIG_DDR_ECC defined and resulted in errors such as: > > > > > > Configuring for canyonlands board... > > > fsl_dma.c:50:2: error: #error "Freescale DMA engine not supported on > > > your processor" > > > make[1]: *** No rule to make target `.depend', needed by `libdma.a'. > > > Stop. > > > > > > Signed-off-by: Peter Tyser <pty...@xes-inc.com> > > > > Thanks Peter. > > > > Wolfgang, I suggest that you pull this patch directly so that the > > breakage is fixed. > > Done.
This patch is still not available in mainline. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot