Dear Stefan Roese, In message <200907171326.25645...@denx.de> you wrote: > > > But would it not be useful to be able to detect any "illegal" > > settings, for example resulting from accidentyial corruption of the > > EEPROM data? > > I don't understand this. How should the code detect an "illegal" setting? All > settings configured in the board specific code are valid.
You define a list of ppc4xx_config_count known configuration settings; the data read from the EEPROM either matches one of these then it is a "known" or "legal" setting, or it does not - in that case the EEPROM contains an "illegal" setting. This should at least trigger a warning message (probably including the hex values as read from the EEPROM). Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de The IQ of the group is the lowest IQ of a member of the group divided by the number of people in the group. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
