[U-Boot] [PATCH 04/12] arm: mx6: cm-fx6: setup hdmi only on hdmi enable

[Nikita Kiryanov]

Refactor display code to only setup hdmi if do_enable_hdmi() is invoked.

Cc: Stefano Babic <sba...@denx.de>
Cc: Igor Grinberg <grinb...@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
---
 board/compulab/cm_fx6/cm_fx6.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c
index 3e518c1..e85c8ab 100644
--- a/board/compulab/cm_fx6/cm_fx6.c
+++ b/board/compulab/cm_fx6/cm_fx6.c
@@ -52,6 +52,9 @@ int splash_screen_prepare(void)
 #ifdef CONFIG_IMX_HDMI
 static void cm_fx6_enable_hdmi(struct display_info_t const *dev)
 {
+       struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+       imx_setup_hdmi();
+       setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK);
        imx_enable_hdmi_phy();
 }
 
@@ -79,15 +82,9 @@ static struct display_info_t preset_hdmi_1024X768 = {
 
 static void cm_fx6_setup_display(void)
 {
-       struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
        struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
-       int reg;
 
        enable_ipu_clock();
-       imx_setup_hdmi();
-       reg = __raw_readl(&mxc_ccm->CCGR3);
-       reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK;
-       writel(reg, &mxc_ccm->CCGR3);
        clrbits_le32(&iomuxc_regs->gpr[3], MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK);
 }
 
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot