This is my second try for Olimex SAM9-L9260/61 board support patches. I deleted the board ethernet initialization and hopefully will add it later in a state that can be accepted.
Here follows the first patch. --- Boards utilizing the Atmel LCD driver can now specify that the LCD clock must be inverted by defining the macro CONFIG_ATMEL_LCD_INVCLK. Signed-off-by: Dimitar Dimitrov <dinu...@gmail.com> --- drivers/video/atmel_lcdfb.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index db86763..64f8e87 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -112,6 +112,9 @@ void lcd_ctrl_init(void *lcdbase) value |= panel_info.vl_sync; value |= (panel_info.vl_bpix << 5); +#if defined(CONFIG_ATMEL_LCD_INVCLK) + value |= ATMEL_LCDC_INVCLK_INVERTED; +#endif lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON2, value); /* Vertical timing */ -- 1.5.6.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot