This patchset: - removes sram polling while reading/writing from flash. - fixes trigger base & transfer start address register programming. This fix superseeds the previous patch "spi: cadence_qspi: Fix the indirect ahb trigger address setting" - adds support to get fifo width from device tree
Vikas Manocha (6): spi: cadence_qspi: remove sram polling from flash read spi: cadence_qspi: remove sram polling from flash write spi: cadence_qspi: move trigger base configuration in init spi: cadence_qspi: fix indirect read/write start address spi: cadence_qspi: fix base trigger address & transfer start address spi: cadence_qspi: get fifo width from device tree arch/arm/dts/socfpga.dtsi | 2 + arch/arm/dts/stv0991.dts | 4 +- drivers/spi/cadence_qspi.c | 14 +++-- drivers/spi/cadence_qspi.h | 6 +- drivers/spi/cadence_qspi_apb.c | 124 +++++++++------------------------------- 5 files changed, 43 insertions(+), 107 deletions(-) -- 1.7.9.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
