Hi Peng, On Sun, Jun 14, 2015 at 6:38 AM, Peng Fan <peng....@freescale.com> wrote: > Since rom code supports the following commands, add new commands support in > imximage. > > 1. CHECK_BITS_SET 4 [address] [mask bit] > means: > while ((*address & mask) != mask); > > 2. CHECK_BITS_CLR 4 [address] [mask bit] > means: > while ((*address & ~mask) != 0); > > 2. CLR_BIT 4 [address] [mask bit] > means: > *address = *address & ~mask; > > dcd_v2_t is redefined, because there may not be only one write data command, > there may be many different commands like CHECK_BITS_SET, CHECK_BITS_CLR and > CLR_BIT. > > dcd_len is still leaved there, since changing it needs changes for dcd v1. > For v2, we check whether dcd size is larger than MAX_DCD_SIZE_V2, but not > dcd_len. > > Signed-off-by: Peng Fan <peng....@freescale.com>
What about just using SPL mechanism instead? Regards, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
