Hi Simon, On Sun, Jun 7, 2015 at 10:50 PM, Simon Glass <s...@chromium.org> wrote: > The SPI flash starts off protected on baytrail. The code which is supposed to > fix this is broken. This series fixes that, enables the SPI environment and > adds documentation. > > Also when driver model is enabled for PCI some bugs appear. This series fixes > those and enables driver model for PCI on minnowboard MAX. > > > Simon Glass (11): > spi: sf: Print the error code on failure > dm: spi: Correct minor nits in ICH driver > dm: spi: Correct status register access width > dm: spi: Correct BIOS protection logic for ICH9 > dm: spi: Enable environment for minnowmax > x86: Add ROM image description for minnowmax > x86: pci: Tidy up the generic x86 PCI driver > dm: x86: minnowmax: Move PCI to use driver model > dm: pci: Use the correct hose when configuring devices > dm: pci: Correct bus number when scanning sub-buses > dm: x86: baytrail: Correct PCI region 3 when driver model is used >
I've finished review for the series except #9 and #10 which are driver model related as I am not quite familiar with the dm stuff. [snip] Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
