In case the DC-DC is already enabled mxs_enable_4p2_dcdc_input() returns
without reenabling brown out detection. So fix this issue by
moving the return before brown out deactivation.

Signed-off-by: Stefan Wahren <stefan.wah...@i2se.com>
---
 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c 
b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
index c342217..42f3df2 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
@@ -332,6 +332,11 @@ static void mxs_enable_4p2_dcdc_input(int xfer)
 
        debug("SPL: %s 4P2 DC-DC Input\n", xfer ? "Enabling" : "Disabling");
 
+       if (xfer && (readl(&power_regs->hw_power_5vctrl) &
+                       POWER_5VCTRL_ENABLE_DCDC)) {
+               return;
+       }
+
        prev_5v_brnout = readl(&power_regs->hw_power_5vctrl) &
                                POWER_5VCTRL_PWDN_5VBRNOUT;
        prev_5v_droop = readl(&power_regs->hw_power_ctrl) &
@@ -343,11 +348,6 @@ static void mxs_enable_4p2_dcdc_input(int xfer)
 
        clrbits_le32(&power_regs->hw_power_ctrl, POWER_CTRL_ENIRQ_VDD5V_DROOP);
 
-       if (xfer && (readl(&power_regs->hw_power_5vctrl) &
-                       POWER_5VCTRL_ENABLE_DCDC)) {
-               return;
-       }
-
        /*
         * Recording orignal values that will be modified temporarlily
         * to handle a chip bug. See chip errata for CQ ENGR00115837
-- 
1.7.9.5

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to