On Tue, 2015-05-19 at 10:01 -0700, Tim Harvey wrote: > remove unnecessary clearing of SWSM.SWSM_SMBI when obtaining the SW > semaphore. This was introduced in 951860634fdb557bbb58e0f99215391bc0c29779 > while adding i210 support and should be now resolved by releasing the > semaphore when no longer needed. > > Cc: Marcel Ziswiler <mar...@ziswiler.com> > Cc: Marek Vasut <ma...@denx.de> > Cc: Aneesh Bansal <aneesh.ban...@freescale.com> > Cc: Naveen Burmi <naveenbu...@freescale.com> > Cc: Po Liu <po....@freescale.com> > Cc: Bin Meng <bmeng...@gmail.com> > Cc: Alison Wang <alison.w...@freescale.com> > Cc: Reinhard Arlt <reinhard.a...@esd-electronics.com> > Cc: Shengzhou Liu <shengzhou....@freescale.com> > Cc: York Sun <york...@freescale.com> > Signed-off-by: Tim Harvey <thar...@gateworks.com> > --- > drivers/net/e1000.c | 4 ---- > 1 file changed, 4 deletions(-) > > diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c > index f960024..a78ffc4 100644 > --- a/drivers/net/e1000.c > +++ b/drivers/net/e1000.c > @@ -996,10 +996,6 @@ e1000_get_software_semaphore(struct e1000_hw *hw) > > DEBUGFUNC(); > > - swsm = E1000_READ_REG(hw, SWSM); > - swsm &= ~E1000_SWSM_SMBI; > - E1000_WRITE_REG(hw, SWSM, swsm); > - > if (hw->mac_type != e1000_80003es2lan) > return E1000_SUCCESS; >
Tested on Apalis T30 1GB V1.1A with properly fused i211 Tested on Apalis T30 2GB V1.1A with iNVM fused i210 Tested on Apalis T30 1GB V1.0A with tools only aka non fused i211 Tested-by: Marcel Ziswiler <marcel.ziswi...@toradex.com> --- BTW: Still fails on Apalis T30 2GB V1.0E with tools only aka non fused i210 as follows: e1000: e1000#0: ERROR: Hardware Initialization Failed In our downstream production U-Boot we temporarily hacked this as follows for now: http://git.toradex.com/cgit/u-boot-toradex.git/commit/?h=2015.04-toradex&id=2d8ea651b6da79047b6fa729863d25b5eb9e15d7 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
