Hi Matthew, On Thu, May 14, 2015 at 7:39 PM, Matthew Starr <mst...@hedonline.com> wrote: > It appears that setting CONFIG_MXC_USB_PORT to 0 then loads the OTG port on > the i.MX53. The code appears to be in drivers/usb/host/ehci-mx5.c. The > problem then is that the USB host port is then not usable since my i.MX53 > board dedicates the OTG port to USB client functionality only. > > Now I am trying to get both USB Host port 1 and USB OTG port 0 working at the > same time. Does u-boot allow using multiple USB controller ports at the same > time?
Yes, you can use both ports. In order to do so, you need to pass #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 in your config file. Regards, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
