Hi Tim, On Fri, May 15, 2015 at 10:31 AM, Tim Harvey <thar...@gateworks.com> wrote:
> Yes, that sounds like the best approach. What were your thoughts on > enabling the second CPU: line just to display the temperature grade if > CONFIG_IMX6_THERMAL was not enabled? > > I'm surprised someone on this list hasn't already tested this on IMX6SX. > > Fabio - certainly you must have a reference board with an IMX6SX and > could enable/test that the CPU markings agree with what is > detected/displayed via OTP? Yes, I do have a mx6sx sdb board, but the one I have is from the old silicon and I had issues event with the temperature reading, so I prefer not to rely on my testing. Ye Li / Peng / Nitin, Could some of you please test Tim's series on a mx6sx sdb and let us know what it displays on the CPU lines? Thanks, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
