When CONFIG_IMX6_THERMAL is defined print the CPU temperature grade info along with the current temperature.
Before: CPU: Temperature 42 C After: CPU: Automotive temperature grade (-40C to 125C) at 42C CPU: Industiral temperature grade (-40C to 105C) at 42C CPU: Extended Commercial temperature grade (-20C to 105C) at 42C Signed-off-by: Tim Harvey <thar...@gateworks.com> --- v2: - moved display of CPU temperature grade to own patch and combined with the current temperature from the thermal sensor driver - add example output to description Signed-off-by: Tim Harvey <thar...@gateworks.com> --- arch/arm/imx-common/cpu.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index 6b20482..f1b49bb 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -16,6 +16,7 @@ #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> #include <asm/arch/crm_regs.h> +#include <imx_thermal.h> #include <ipu_pixfmt.h> #include <thermal.h> #include <sata.h> @@ -146,7 +147,7 @@ int print_cpuinfo(void) #if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL) struct udevice *thermal_dev; - int cpu_tmp, ret; + int cpu_tmp, minc, maxc, ret; #endif cpurev = get_cpu_rev(); @@ -172,16 +173,34 @@ int print_cpuinfo(void) #endif #if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL) + puts("CPU: "); + if (!is_cpu_type(MXC_CPU_MX6SX)) { + switch (get_cpu_temp_grade(&minc, &maxc)) { + case TEMP_AUTOMOTIVE: + puts("Automotive temperature grade "); + break; + case TEMP_INDUSTRIAL: + puts("Industrial temperature grade "); + break; + case TEMP_EXTCOMMERCIAL: + puts("Extended Commercial temperature grade "); + break; + default: + puts("Commercial temperature grade "); + break; + } + printf("(%dC to %dC)", minc, maxc); + } ret = uclass_get_device(UCLASS_THERMAL, 0, &thermal_dev); if (!ret) { ret = thermal_get_temp(thermal_dev, &cpu_tmp); if (!ret) - printf("CPU: Temperature %d C\n", cpu_tmp); + printf(" at %dC\n", cpu_tmp); else - printf("CPU: Temperature: invalid sensor data\n"); + puts(" - invalid sensor data\n"); } else { - printf("CPU: Temperature: Can't find sensor device\n"); + puts(" - invalid sensor device\n"); } #endif -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot