All of the ENV_IS_IN_* configs moved to Kconfig. Signed-off-by: Joe Hershberger <joe.hershber...@ni.com>
--- common/Kconfig | 85 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+) diff --git a/common/Kconfig b/common/Kconfig index 15759f7..4397e69 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -1,3 +1,88 @@ +menu "Environment" + +choice + prompt "Environment location" + default ENV_IS_NOWHERE + help + Select where the environment is persisted. + +config ENV_IS_IN_DATAFLASH + bool "Data Flash" + help + Select this if you have a DataFlash memory device which you + want to use for the environment. + +config ENV_IS_IN_EEPROM + bool "EEPROM" + help + Select this if you have an EEPROM or similar serial access + device and a driver for it. + +config ENV_IS_IN_FLASH + bool "Flash" + help + Select this if the environment is in flash memory. + +config ENV_IS_IN_MMC + bool "MMC" + help + Select this if you have an MMC device which you want to use + for the environment. + +config ENV_IS_IN_FAT + bool "FAT" + help + Select this if you want to use the FAT file system for the + environment. + +config ENV_IS_IN_NAND + bool "NAND" + help + Select this if you have a NAND device which you want to use + for the environment. + +config ENV_IS_IN_NVRAM + bool "NVRAM" + help + Select this if you have some non-volatile memory device + (NVRAM, battery buffered SRAM) which you want to use for the + environment. + +config ENV_IS_IN_ONENAND + bool "OneNAND" + help + Select this if you have a OneNAND device which you want to use + for the environment. + +config ENV_IS_IN_SPI_FLASH + bool "SPI Flash" + help + Select this if you have a SPI Flash memory device which you + want to use for the environment. + +config ENV_IS_IN_REMOTE + bool "Remote" + help + Select this if you have a remote memory space which you + want to use for the local device's environment. + +config ENV_IS_IN_UBI + bool "UBI" + help + Select this if you have an UBI volume that you want to use for + the environment. This has the benefit of wear-leveling the + environment accesses, which is important on NAND. + +config ENV_IS_NOWHERE + bool "Nowhere" + help + Select this if there is no storage for the environment and + each boot U-Boot will use the default environment. + +endchoice + +endmenu + menu "Command line interface" config HUSH_PARSER -- 1.7.11.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
