On Thursday 09 July 2009 09:21:33 Dieter Kiermaier wrote: > > On Wednesday 08 July 2009 19:48:19 Prafulla Wadaskar wrote: > > > > MAINTAINERS | 1 + > > > > MAKEALL | 1 + > > > > Makefile | 3 + > > > > board/keymile/suen3/Makefile | 51 +++++++++ > > > > board/keymile/suen3/config.mk | 25 ++++ > > > > board/keymile/suen3/sdramregs.txt | 28 +++++ > > > > > > This file will be of no use until we have proposed bin_dep.sh and > > > doimage utility in place. > > > > Even without doimage and/or bin_dep.sh in place, I think it makes perfect > > sense to include this SDRAM init file in the board directory. Mainly > > because of two reasons: > > > > a) Keep bootloader related files in one place (SDRAM init is crucial for > > correct operation) > > > > b) Keep those files under revision control > > > > And I don't think that anything really speaks against having this file in > > this place for now. > > > > But anyway, we should try to get at least your bin_dep.sh infrastructure > > accepter. Or at least restart the discussion about it (and probably about > > doimage as well). > > I would prefer this, too. If I'm allowed to vote for this :)
Sure you are. At least if you share my opinion! ;) Thanks. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
