On Fri, May 1, 2015 at 2:10 PM, Fabio Estevam <feste...@gmail.com> wrote: > On Fri, May 1, 2015 at 1:20 PM, Vagrant Cascadian <vagr...@aikidev.net> wrote: > >> I did revert back, and at first that seemed to fix it, but after more >> testing, the issue appears to be intermittent, and unrelated to the USB >> changes. >> >> So my earlier Tested-By stands; I think it's worth applying. > > Ok, thanks for the clarification. > > I will try to reproduce/investigate this FEC/PHY issue next week.
Looking at Solid-run's tree they have the following commit that may be related to this PHY issue: commit efc4835294122212052a8b8b2a23d14fa2b72177 Author: Rabeeh Khoury <rab...@solid-run.com> Date: Sat Jan 25 17:57:51 2014 +0200 fecmxc_initialize_multi change from phy id to phy mask The fecmxc_initialize_multi now accepts phy address mask instead of a single phy address. Modified otherboard that directly uses fecmxc_initialize_multi() Modified also i.MX6 RXD0/RXD1 pad to pull down (they are also directly connected to the Atheros 8035/8030 although they should be functional only in the RMII mode - 8030). Signed-off-by: Rabeeh Khoury <rab...@solid-run.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot