On Monday, April 27, 2015 at 07:44:15 AM, Ramneek Mehresh wrote:
[...]
> > > diff --git a/include/linux/usb/xhci-fsl.h
> > > b/include/linux/usb/xhci-fsl.h index 8eaab2c..329abf7 100644
> > > --- a/include/linux/usb/xhci-fsl.h
> > > +++ b/include/linux/usb/xhci-fsl.h
> > > @@ -46,6 +46,11 @@
> > >
> > > #define USBOTGSS_IRQ_SET_1_OEVT_EN BIT(16)
> > > #define USBOTGSS_IRQ_SET_1_DMADISABLECLR_EN BIT(17)
> > >
> > > +#ifdef CONFIG_LS102XA
> > > +#define CONFIG_SYS_FSL_XHCI_USB1_ADDR
> > > +CONFIG_SYS_LS102XA_XHCI_USB1_ADDR #define
> > > +CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
> >
> > Do you need to define this _bogus_ address at all? If so, then the driver
> > which depends on this is broken. Why can't you just define a list of
> > addresses instead ? You would be able to use ARRAY_SIZE() in the driver
> > to determine how many controllers there are then. This is how it would
> > look like:
> >
> > #define CONFIG_FOO_BAR_ADDRS { USB1_ADDR, USB2_ADDR, ...,
> > USBn_ADDR }
> >
> > In the driver, there'd be:
> >
> > <type> addrs[] = CONFIG_FOO_BAR_ADDRS;
>
> I agree to use an array for defining list of controller addresses. However,
> the no. of controller(s) to be initialized on a particular platform is
> determined by CONFIG_USB_MAX_CONTROLLER_COUNT used in usb_init() function.
> This macro is defined in each platform file, and defines the index
> argument passed on to xhci_hcd_init(). There may be some platform on which
> we can have more than one controller in soc, but only one is used (exposed
> via external connector). Hence, CONFIG_USB_MAX_CONTROLLER_COUNT is
> defined by platform header file.
Ah right, sorry. Keep the CONFIG_USB_MAX_CONTROLLER_COUNT macro then.
> Hence, I can assign controller address on the basis of address:
> struct fsl_xhci *ctx = &fsl_xhci;
> ctx->hcd = addrs[index];
Yeah
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
