Hi Simon, On Tue, Apr 21, 2015 at 9:54 PM, Simon Glass <s...@chromium.org> wrote: > Hi Bin, > > On 20 April 2015 at 23:05, Bin Meng <bmeng...@gmail.com> wrote: >> Not like other x86 chipset, there is no EEPROM for the ethernet >> controller on the Intel Quark SoC to retreive the mac address >> after power up. With pre-defined mac addresses, U-Boot boots up >> and will not show "Error: dwmac.90006000 address not set" message. >> >> Signed-off-by: Bin Meng <bmeng...@gmail.com> >> --- >> >> include/configs/galileo.h | 2 ++ >> 1 file changed, 2 insertions(+) >> >> diff --git a/include/configs/galileo.h b/include/configs/galileo.h >> index d4d0eb3..961d087 100644 >> --- a/include/configs/galileo.h >> +++ b/include/configs/galileo.h >> @@ -62,6 +62,8 @@ >> #define CONFIG_DESIGNWARE_ETH >> #define CONFIG_DW_ALTDESCRIPTOR >> #define CONFIG_PHYLIB >> +#define CONFIG_ETHADDR 00:02:b3:00:00:00 >> +#define CONFIG_ETH1ADDR 00:02:b3:00:00:01 > > I recall this coming up before with another board - we are not > supposed to set a default MAC address since it may create inexplicable > conflicts on the network if an org two boards on the same network one > day. Can you just set an environment variable?
Yes, I can. But I see lots of boards already use CONFIG_ETHADDR in their board configuration files, so I assume this is allowed. Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
