On 04/16/2015 08:13 PM, Jagan Teki wrote: > On 15 April 2015 at 19:03, Michal Simek <michal.si...@xilinx.com> wrote: >> From: Siva Durga Prasad Paladugu <siva.durga.palad...@xilinx.com> >> >> Added the SPI driver support for ZynqMP >> The controller is same as zynq SPI controller >> >> Signed-off-by: Siva Durga Prasad Paladugu <siva...@xilinx.com> >> Signed-off-by: Michal Simek <michal.si...@xilinx.com> >> --- >> >> arch/arm/include/asm/arch-zynqmp/hardware.h | 3 +++ >> include/configs/xilinx_zynqmp.h | 8 ++++++++ >> 2 files changed, 11 insertions(+) >> >> diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h >> b/arch/arm/include/asm/arch-zynqmp/hardware.h >> index 1fedb1bb4b94..c9dc49d78317 100644 >> --- a/arch/arm/include/asm/arch-zynqmp/hardware.h >> +++ b/arch/arm/include/asm/arch-zynqmp/hardware.h >> @@ -11,6 +11,9 @@ >> #define ZYNQ_SERIAL_BASEADDR0 0xFF000000 >> #define ZYNQ_SERIAL_BASEADDR1 0xFF001000 >> >> +#define ZYNQ_SPI_BASEADDR0 0xFF040000 >> +#define ZYNQ_SPI_BASEADDR1 0xFF050000 >> + >> #define ZYNQ_I2C_BASEADDR0 0xFF020000 >> #define ZYNQ_I2C_BASEADDR1 0xFF030000 >> >> diff --git a/include/configs/xilinx_zynqmp.h >> b/include/configs/xilinx_zynqmp.h >> index 54bca6d47b72..df7541b85baf 100644 >> --- a/include/configs/xilinx_zynqmp.h >> +++ b/include/configs/xilinx_zynqmp.h >> @@ -71,6 +71,14 @@ >> #define CONFIG_CMD_ELF >> #define CONFIG_MP >> >> +/* SPI */ >> +#ifdef CONFIG_ZYNQ_SPI >> +# define CONFIG_SPI_FLASH >> +# define CONFIG_SPI_FLASH_SST >> +# define CONFIG_CMD_SPI > > CMD_SPI is never been verified I suppose, if so not required at this > point of time.
It is enabled on 75 platforms that's why I can't see any problem with it. If something is not verified then it should be verified. If it is completely broken it should be removed. Thanks, Michal _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
