On 15 April 2015 at 19:03, Michal Simek <michal.si...@xilinx.com> wrote: > From: Siva Durga Prasad Paladugu <siva.durga.palad...@xilinx.com> > > Added the SPI driver support for ZynqMP > The controller is same as zynq SPI controller > > Signed-off-by: Siva Durga Prasad Paladugu <siva...@xilinx.com> > Signed-off-by: Michal Simek <michal.si...@xilinx.com> > --- > > arch/arm/include/asm/arch-zynqmp/hardware.h | 3 +++ > include/configs/xilinx_zynqmp.h | 8 ++++++++ > 2 files changed, 11 insertions(+) > > diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h > b/arch/arm/include/asm/arch-zynqmp/hardware.h > index 1fedb1bb4b94..c9dc49d78317 100644 > --- a/arch/arm/include/asm/arch-zynqmp/hardware.h > +++ b/arch/arm/include/asm/arch-zynqmp/hardware.h > @@ -11,6 +11,9 @@ > #define ZYNQ_SERIAL_BASEADDR0 0xFF000000 > #define ZYNQ_SERIAL_BASEADDR1 0xFF001000 > > +#define ZYNQ_SPI_BASEADDR0 0xFF040000 > +#define ZYNQ_SPI_BASEADDR1 0xFF050000 > + > #define ZYNQ_I2C_BASEADDR0 0xFF020000 > #define ZYNQ_I2C_BASEADDR1 0xFF030000 > > diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h > index 54bca6d47b72..df7541b85baf 100644 > --- a/include/configs/xilinx_zynqmp.h > +++ b/include/configs/xilinx_zynqmp.h > @@ -71,6 +71,14 @@ > #define CONFIG_CMD_ELF > #define CONFIG_MP > > +/* SPI */ > +#ifdef CONFIG_ZYNQ_SPI > +# define CONFIG_SPI_FLASH > +# define CONFIG_SPI_FLASH_SST > +# define CONFIG_CMD_SPI
CMD_SPI is never been verified I suppose, if so not required at this point of time. > +# define CONFIG_CMD_SF > +#endif > + > #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) > # define CONFIG_MMC > # define CONFIG_GENERIC_MMC > -- > 2.3.5 thanks! -- Jagan. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
