Aneesh, On 03/04/2015 11:38 PM, Aneesh Bansal wrote: > Secure Boot Target is added for NAND for P3041. > Changes: > In PowerPC, the core begins execution from address 0xFFFFFFFC. > In case of secure boot, this default address maps to Boot ROM. > The Boot ROM code requires that the bootloader(U-boot) must lie > in 0 to 3.5G address space i.e. 0x0 - 0xDFFFFFFF. > > In case of NAND Secure Boot, CONFIG_SYS_RAMBOOT is enabled and CPC is > configured as SRAM. U-Boot binary will be located on this SRAM at > location 0xBFF40000 with entry point as 0xBFFFFFFC. > > Signed-off-by: Ruchika Gupta <ruchika.gu...@freescale.com> > Signed-off-by: Aneesh Bansal <aneesh.ban...@freescale.com> > --- > Changes in v6: > Changed the version in Patchset. >
Are we closed on this patch discussion? I see open discussion for v4 patch after you posted v6. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot