Hello noti1234,
On 30-03-15 20:44, noti1234 wrote:
I'm having problems booting my DaVinci board with Green-Hills' Integrity OS.
My setup is:
Hardware: TI's DaVinci EVM:
http://www.spectrumdigital.com/product_info.php?products_id=192
u-boot: u-boot-2015.4-rc3. Configured for dvevm with elf support.
* If the board's flash is programmed with u-boot then the Integrity OS
initialization process gets stuck.
* If the board's flash is erased (which means I get BOOTME BOOTME requests)
then the Integrity OS initialization process, using Green Hills probe
(something like JTAG), works fine.
This behavior is strange. It seems that something in the u-boot
initialization process, messes up something for the Integrity OS to run
smoothly.
To make things clearer:
The u-boot works fine before trying to boot the Integrity OS elf. I can read
memory regions, write, tftp, etc.
The problem is that the init process of the Integrity OS gets stuck.
So currently I can only boot the board using the Green Hills probe, when the
flash has no boot loader.
Do you have any idea how to approach this problem? Any way to debug it?
I have no knowledge of your actual setup, but it might be worth
checking if disabling caches at compile time helps (in your boards config
or perhaps menuconfig nowadays).
Regards,
Jeroen
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
