This patch implements the is_pci_host() function in a similiar way
as it is used on 440 targets.
The former path with CONFIG_PCI_HOST == PCI_HOST_AUTO does not
build on 405EP targets because checking the PCI arbiter is different.
So putting the fixed code into a separate function makes the code
more readable.
Also using is_pci_host() on 405 brings 405 and 440 PCI code
a little bit closer.
In preparation for an upcoming 405EP based PMC module I made this
function weak so that it can be overwritten from board specific code.
Signed-off-by: Matthias Fuchs <matthias.fu...@esd.eu>
---
cpu/ppc4xx/4xx_pci.c | 19 ++++++++++++++++---
1 files changed, 16 insertions(+), 3 deletions(-)
diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c
index 99b8e2f..31ca85d 100644
--- a/cpu/ppc4xx/4xx_pci.c
+++ b/cpu/ppc4xx/4xx_pci.c
@@ -99,6 +99,19 @@ ushort pmc405_pci_subsys_deviceid(void);
/*#define DEBUG*/
+int __is_pci_host(struct pci_controller *hose)
+{
+#if defined(CONFIG_405GP)
+ if (mfdcr(strap) & PSR_PCI_ARBIT_EN)
+ return 1;
+#elif defined (CONFIG_405EP)
+ if (mfdcr(cpc0_pci) & CPC0_PCI_ARBIT_EN)
+ return 1;
+#endif
+ return 0;
+}
+int is_pci_host(struct pci_controller *hose) __attribute__((weak,
alias("__is_pci_host")));
+
/*-----------------------------------------------------------------------------+
* pci_init. Initializes the 405GP PCI Configuration regs.
*-----------------------------------------------------------------------------*/
@@ -270,7 +283,7 @@ void pci_405gp_init(struct pci_controller *hose)
*/
pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID,
CONFIG_SYS_PCI_SUBSYS_VENDORID);
#ifdef CONFIG_CPCI405
- if (mfdcr(strap) & PSR_PCI_ARBIT_EN)
+ if (is_pci_host(hose))
pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID,
CONFIG_SYS_PCI_SUBSYS_DEVICEID);
else
pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID,
CONFIG_SYS_PCI_SUBSYS_DEVICEID2);
@@ -295,7 +308,7 @@ void pci_405gp_init(struct pci_controller *hose)
#if (CONFIG_PCI_HOST != PCI_HOST_ADAPTER)
#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
- if ((mfdcr(strap) & PSR_PCI_ARBIT_EN) ||
+ if (is_pci_host(hose) ||
(((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
#endif
{
@@ -325,7 +338,7 @@ void pci_405gp_init(struct pci_controller *hose)
* Scan the PCI bus and configure devices found.
*--------------------------------------------------------------------------*/
#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
- if ((mfdcr(strap) & PSR_PCI_ARBIT_EN) ||
+ if (is_pci_host(hose) ||
(((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
#endif
{
--
1.6.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
