On 03/20/2015 02:15 PM, Scott Wood wrote: > On Fri, 2015-03-20 at 12:21 -0700, York Sun wrote: >> From: Scott Wood <scottw...@freescale.com> >> >> This adds NAND boot support for LS2085AQDS, using SPL framework. >> >> To form a NAND image, append u-boot-with-spl.bin after a proper >> nand boot RCW and flash to the beginning of NAND. > > Do we want to do it this way, or should we keep the RCW in a separate > block?
I would like to see RCW in a separated block. > > What constitutes a "proper nand boot RCW" (those were not my words)? > There are details in this patch regarding offsets that need to match > details in the PBI (which is more than just RCW). It is not your original words. Yours was "To form a NAND image, append u-boot-with-spl.bin after PBL_0x3_0x07_1333_nand.bin and flash to the beginning of NAND.". I try to make the message generic. A proper nand boot RCW means the RCW should contains PBI commands to set bootloc and block copy the image. Since RCW is not in the scope of u-boot, I cannot refer to any specific file. Do you want to include an RCW file into u-boot, like those for powerpc boards? > > It would also be nice to sort out loading the environment during SPL. That can be an additional patch when you have it. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
