Hi Tom, On 10 March 2015 at 05:24, Beaman, Thomas <thomas.bea...@xerox.com> wrote: > Hi Simon, > > Do you know what will be the timeframe of when someone may be able to look at > this in more detail. I will be able to help test any updates if needed >
I will take a look once I have things lined up for the next release, likely mid April. Regards, Simon > Thanks, > Tom > > -----Original Message----- > From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass > Sent: Monday, March 09, 2015 11:49 AM > To: Beaman, Thomas > Cc: u-boot@lists.denx.de; Bin Meng; gabriel huau > Subject: Re: MinnowBoard Max uboot > > +Bin and Gabriel > > Hi Tom, > > On 9 March 2015 at 08:08, Beaman, Thomas <thomas.bea...@xerox.com> wrote: >> >> >> Hi Simon, >> >> >> >> I see you have put support for the MinnowBoard Max in the u-boot mainline. >> Thanks this is a very useful addition. I have been able to follow >> your readme and build a working bare metal uboot. Using the built >> uboot I can load and bring up a Linux Kernel. >> >> >> >> What I noticed from the running kernel is that only one of the two >> cores on the E3825 is running. In the power PC uboots I usually see a >> section for the multiple cores in the .dts file. My questions is how >> do I get both CPUs running on this board. Is it a uboot .dts file >> setup that will enable this, or is something in the kernel start up that >> does this. >> >> >> >> As a test I boot the same kernel using the EFI BIOS on the minnow >> board and both CPUs are running. >> >> >> >> Any suggestions or comments you have would be welcomed. >> >> > > My guess is that the LAPIC CPU start-up is missing. It isn't 100% clear what > the FSP does and does not do, but perhaps it does not do that. > > I did make something of a start on this with ivybridge but it isn't complete, > and it seems to be needed here. > > Regards, > Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot