Add workaround for Cortex-A15 ARM erratum 798870 which says
"If back-to-back speculative cache line fills (fill A and fill B) are
issued from the L1 data cache of a CPU to the L2 cache, the second
request (fill B) is then cancelled, and the second request would have
detected a hazard against a recent write or eviction (write B) to the
same cache line as fill B then the L2 logic might deadlock."

Implementations for SoC families such as Exynos, OMAP5/DRA7 etc
will be widely different.

Every SoC has slightly different manner of setting up access to L2ACLR
and similar registers since the Secure Monitor handling of Secure
Monitor Call(smc) is diverse. Hence an weak function is introduced
which may be overriden to implement SoC specific accessor implementation.

Based on ARM errata Document revision 18.0 (22 Nov 2013)

Signed-off-by: Nishanth Menon <n...@ti.com>
---
 README                       |    5 +++++
 arch/arm/cpu/armv7/Makefile  |    2 +-
 arch/arm/cpu/armv7/cp15.c    |   23 +++++++++++++++++++++++
 arch/arm/cpu/armv7/start.S   |   25 ++++++++++++++++++++++++-
 arch/arm/include/asm/armv7.h |    3 +++
 5 files changed, 56 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/cp15.c

diff --git a/README b/README
index 676f41e7f09f..9a0106066b1c 100644
--- a/README
+++ b/README
@@ -690,6 +690,11 @@ The following options need to be configured:
                exists, unlike the similar options in the Linux kernel. Do not
                set these options unless they apply!
 
+               NOTE: The following can be machine specific errata. These
+               do have ability to provide rudimentary version and machine
+               specific checks, but expect no product checks.
+               CONFIG_ARM_ERRATA_798870
+
 - Driver Model
                Driver model is a new framework for devices in U-Boot
                introduced in early 2014. U-Boot is being progressively
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index ad22489e1a1f..1312a9db9e84 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -9,7 +9,7 @@ extra-y := start.o
 
 obj-y  += cache_v7.o
 
-obj-y  += cpu.o
+obj-y  += cpu.o cp15.o
 obj-y  += syslib.o
 
 ifneq 
($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_SUNXI),)
diff --git a/arch/arm/cpu/armv7/cp15.c b/arch/arm/cpu/armv7/cp15.c
new file mode 100644
index 000000000000..8ac81c9ba147
--- /dev/null
+++ b/arch/arm/cpu/armv7/cp15.c
@@ -0,0 +1,23 @@
+/*
+ * (C) Copyright 2015 Texas Insturments
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/*
+ * CP15 specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/system.h>
+#include <asm/cache.h>
+#include <asm/armv7.h>
+#include <linux/compiler.h>
+
+void __weak v7_arch_cp15_set_l2aux_ctrl(u32 l2actlr, u32 cpu_midr,
+                                    u32 cpu_rev_comb, u32 cpu_variant,
+                                    u32 cpu_rev)
+{
+       asm volatile ("mcr p15, 1, %0, c15, c0, 0\n\t" : : "r"(l2actlr));
+}
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 9b49ece2d650..89637e26395d 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -166,7 +166,30 @@ ENTRY(cpu_init_cp15)
        mcr     p15, 0, r0, c15, c0, 1  @ write diagnostic register
 #endif
 
-       mov     pc, lr                  @ back to my caller
+       mov     r5, lr                  @ Store my Caller
+       mrc     p15, 0, r1, c0, c0, 0   @ r1 has Read Main ID Register (MIDR)
+       mov     r3, r1, lsr #20         @ get variant field
+       and     r3, r3, #0xf            @ r3 has CPU variant
+       and     r4, r1, #0xf            @ r4 has CPU revision
+       mov     r2, r3, lsl #4          @ shift variant field for combined value
+       orr     r2, r4, r2              @ r2 has combined CPU variant + revision
+
+#ifdef CONFIG_ARM_ERRATA_798870
+       cmp     r2, #0x30               @ Applies to lower than R3p0
+       bge     skip_errata_798870      @ skip if not affected rev
+       cmp     r2, #0x20               @ Applies to including and above R2p0
+       blt     skip_errata_798870      @ skip if not affected rev
+
+       mrc     p15, 1, r0, c15, c0, 0  @ read l2 aux ctrl reg
+       orr     r0, r0, #1 << 7         @ Enable hazard-detect timeout
+       push    {r1-r5}                 @ Save the cpu info registers
+       bl      v7_arch_cp15_set_l2aux_ctrl
+       isb                             @ Recommended ISB after l2actlr update
+       pop     {r1-r5}                 @ Restore the cpu info - fall through
+skip_errata_798870:
+#endif
+
+       mov     pc, r5                  @ back to my caller
 ENDPROC(cpu_init_cp15)
 
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h
index edb3b80015ba..69abc4791ae5 100644
--- a/arch/arm/include/asm/armv7.h
+++ b/arch/arm/include/asm/armv7.h
@@ -138,6 +138,9 @@ extern char __secure_end[];
 
 #endif /* CONFIG_ARMV7_NONSEC || CONFIG_ARMV7_VIRT */
 
+void v7_arch_cp15_set_l2aux_ctrl(u32 l2auxctrl, u32 cpu_midr,
+                                u32 cpu_rev_comb, u32 cpu_variant,
+                                u32 cpu_rev);
 #endif /* ! __ASSEMBLY__ */
 
 #endif
-- 
1.7.9.5

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to